In the blasting vibration monitoring activity, a single monitoring point needs to test the vibration velocity in three directions. We often use a three-component probe to test the vibration vibration monitoring activity. The single monitoring point needs to test the vibration velocity in three directions. We often use one. The three-component probe test, the probe is actually integrated with the sensor core in three directions, and the three channels of the acquisition system are required to complete the test, and the blasting vibrometers on the market are all manufactured by a 4-channel acquisition system. It can be known that a set of blasting vibrometers can only be equipped with one three-component probe to test one monitoring point. If the monitoring point only needs the vibration speed in one direction, then a set of blasting vibrometers can connect the vibration velocity probes in four directions and perform vibration test on the four monitoring points. This operation increases the difficulty of field wiring and reduces the stability of the system. For other issues, it is recommended to use a set of equipment to perform a three-component vibration speed test on a single monitoring point. Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Nano Coating features: Does not change the original texture; Has superior adhesive force and forms complete molecular structure on the surface; Excellent optical property, transparency and low viscosity; Extremely low surface tension and good non-hydrophilic and non-lipophilic effect; Excellent resistance to weather and chemicals ; Excellent abrasion resistance; Good and durable characteristics to anti-stain and chemicals; Lower dynamic friction coefficient, high quality handfeel
Nano Coating For Tempered Protective Film
Anti Friction Coating,Chemical Coating,Material Coating,Nano Coating For Tempered Protective Film
Guangdong Giant Fluorine Energy Saving Technology Co.,Ltd , https://www.tuwtech.com