Now many three-roll gate manufacturers do not provide on-site installation services, so here by innovation-technology combined with the following three roll gate installation knowledge, solve problems for the use of units.
1: When the three-roll gate brake is used outdoors, it is necessary to pay attention to the moisture-proof matters to ensure the normal operation of the gate in a clean and dry environment. If it is necessary to use it outdoors, waterproof measures are required. In this way, not only the three-roll gate brake is increased. The service life also ensures the stable operation of the gate;
2: Do not add any auxiliary function equipment on the three-roll gate sluice without the permission of the relevant technicians to avoid accidents, safety accidents, and ensure the normal operation of the gate system;
3: The installation of the triple roller brake must be performed by the installer or the relevant electrician according to the installation guidelines. Specific ways:
(1) Open the cover of the chassis first and do a power-up job;
(2) After the relevant installation steps are completed, close the air switch and start using it;
(3) The technicians shall test the usage of the gates, check the hidden troubles, and ensure that the system is in normal operation and then put them into use;
4: When the three-roll gate sluice gate is in the external control system, it should confirm the signal output by the controller and use it again.
Summary: The correct installation and use of the three-roll gate sluice gate shall be carried out by technical personnel and relevant familiar personnel in conjunction with the installation and operation instructions. After the failure of the gate, the three-roll gate sluice manufacturer shall be promptly contacted for follow-up work such as guarantee and maintenance. .
Diameter 200mm Test Sieve,Short Test Sieve,Height 25mm Test Sieve,SS304 Diameter Sieve
Xinxiang Xin Ming De Machinery Co., Ltd. , https://www.xmdsieve.com