Wall tiles are the abbreviation of wall tiles. In daily life, these wall tiles are often used for the decoration of the facades of bathrooms, kitchens and balconies. The main purpose of the wall tile is that the wall tile can effectively protect the wall surface from being wetted by water droplets to achieve the effect of preventing moisture and abrasion. We also often use wall tiles to decorate the edges of doors and windows. We often use wall tiles at the edges of interior walls. With the protection of wall tiles, when we accidentally kick the wall, the wall will not stay. Scars. So, what is the construction process of bricks in home renovation? Below, Xiao Bian introduced the introduction for everyone!
1. When we are preparing for construction, we must consider that the colors of the wall tiles and the floor tiles should be the same, and the specifications of the wall tiles should meet the requirements of the decorated house and the bending strength of the wall tiles. When selecting the wall tiles, try to use the same batch of bricks. At the same time, ensure that the brick surface is smooth, the pattern is correct, and there is no color difference. The deviation of the length and width of each brick plate should not be too large. Check whether the plate is flat and the gap between the brick and the brick cannot be too large.
2. Brush the wall with cement slurry and compact it at the same time. If the wall surface is uneven, repair it with cement mortar. Then, according to the design requirements, the waterproof paint shall be applied to the wall once again, and the bricks shall be arranged according to the design requirements in combination with the actual and selected specifications of the wall tiles.
3, before the official paste with bad tiles and paste paste on the wall or column, to control the smoothness of the surface of the paste tile, do not Xiaobian say, we all know that paste the wall tile from the bottom up, posted After the wall tiles, especially in the following brick surface may be very dirty, it is necessary to wait for a few days to completely dry the brick wall and clean the brick surface. Even if the great project is completed here, it will be more than half completed.
4, this step looks simple, but in essence it is the most important step, that is, check whether the quality standards. Use our eyes to observe carefully, check whether the gap between the brick and the brick is uniform, and whether the color is the same. You can gently tap the brick surface with your hand. Experienced friends will know if the brick is filled with dense under the sound.
The above is related to the construction technology of the brick wall . Hope to help your home improvement construction. More home improvement knowledge, please pay attention to this site information!
Wall tiles kitchen wall tiles
Reading Desk Lamp,Wireless Desk Lamp,Table Lamp For Study Desk,Usb Desk Lamp
NINGBO ZHENGUO INTELLINGENT LIGHTING CO.,LTD , https://www.intellingentlighting.com