In the wireless bridge installation process, wireless bridge installation and debugging is very important. To ensure normal communication between the two wireless bridges, we must ensure that the wireless bridge connection is normal, and that other accessories can meet the transmission standards. And requirements. In the work of Shenzhen Leian science and technology personnel, many customers will ask the wireless bridge can not start normally, so Xiao Bian gives you a simple analysis of the reasons and solutions:
1. Check whether the power connection, the connection between the POE power supply module and the wireless bridge are normal, and determine whether the power supply is normal.
2, network cable length, to the device power supply (POE mouth to bridge) network cable as much as possible within 25 meters, LAN port cable that can be 40-50 meters, choose a good quality over 6 network cable can be longer, but can not More than 100 meters, if more than 100 meters, you can add switches in the middle of the network cable to connect.
3, network cable selection, choose a better network cable, such as Super 5, Super 6 cable is most suitable, there are a lot of counterfeit on the market, do not use.
4, the network cable's crystal head is not firmly crimped or the wrong wire sequence (redo crystal head).
If you are unable to start the wireless bridge normally, it is recommended that you use the above methods to troubleshoot. If you still cannot solve the problem, please contact Shenzhen Leian professional technicians to inquire!
1. Check whether the power connection, the connection between the POE power supply module and the wireless bridge are normal, and determine whether the power supply is normal.
2, network cable length, to the device power supply (POE mouth to bridge) network cable as much as possible within 25 meters, LAN port cable that can be 40-50 meters, choose a good quality over 6 network cable can be longer, but can not More than 100 meters, if more than 100 meters, you can add switches in the middle of the network cable to connect.
3, network cable selection, choose a better network cable, such as Super 5, Super 6 cable is most suitable, there are a lot of counterfeit on the market, do not use.
4, the network cable's crystal head is not firmly crimped or the wrong wire sequence (redo crystal head).
If you are unable to start the wireless bridge normally, it is recommended that you use the above methods to troubleshoot. If you still cannot solve the problem, please contact Shenzhen Leian professional technicians to inquire!
Conductive Hose,Explosion Proof Hose,Electro Conductive Hose,Electrical Conductive Hose
Changxing VACUFLEX Hose Technology Co., Ltd. , https://www.vacuflex-cn.com