Wood paint construction process

>>> Links: Woodworking Processes and Precautions

Construction process:
1, varnish construction process:
Clean the surface of the woodware â†’ Polished paper â†’ Polished powder â†’ Polished sandpaper â†’ Full scrape the first time putty, sandpaper polishing â†’ Full scraping the second time putty, fine sandpaper polishing â†’ Brushing oil color â†’ Brush the first time varnish â†’Fight for color, refill putty, fine sandpaper polish â†’ brush the second time varnish, fine sandpaper â†’ brush the third time varnish, polishing â†’ sandpaper polishing fade, wax, polish.
2, mixed color paint construction process:
First, clean the dust on the surface of the base layer, repair the base layer â†’ level off with matte paper â†’ paint on the frugal part â†’ puttying on the bottom â†’ dry oil â†’ first pass paint scraper â†’ polishing â†’ brushing primer â†’ primer Dry hard â†’ brushing the surface layer â†’ repair putty to repair â†’ polish wipe the third time the paint brush brush the second time coating â†’ polishing â†’ third paint finish â†’ polishing wax.

Construction points:
Clean oil brushing construction specifications:
1. Polishing the grass-roots is an important process for painting varnish. First of all, the dust, oil and other impurities on the surface of the wood should be removed.
2, the upper oil is also an important process varnish brushing, construction with cotton silk oil powder smear on the surface of the wood, rubbed back and forth by hand, rubbed oil into the eye of the wood.
3, brushing oil, hand brush should be easy and natural, finger gently, to move when not loose, can not afford to brush off.
4, when brushing should be followed in accordance with the requirements of many times, every time less oyster sauce, operating time, Shun brush requirements, according to the first up and down, first difficult to be easy, first left and then right, first in and then outside the order and Transverse brush erection operation method construction.

Construction specification for wood surface oil mixing:
1, when the grassroots deal with, in addition to cleaning the debris of the grassroots, but also should be partial putty embedding, sandpaper should be polished along the wood grain.
2. Before painting the surface layer, apply a paint sheet (shellac paint) on the bottom of the joint where there is a large amount of color difference and lignanization. Should be painted on the grass-roots dry oil or mooring, brushing dry oil layer to brush all parts of the uniform, can not miss the brush.
3, the base oil dry, full scrape the first time putty, dry sandpaper after hand-abrasive, and then make up high-strength putty, putty to choose not to prevail. When painting surface paint, it should be polished with fine sandpaper.

Precautions:
(1) The grassroots treatment should be constructed as required to ensure that the surface paint will not fail.
(2) Clean up the surrounding environment to prevent dust from flying.
(3) Because the paint has a certain toxicity, it has a strong stimulatory effect on the respiratory tract, and construction must pay attention to good ventilation.

Decoration carpentry knowledge three trees paint paint paint

Cast Iron Castors

Caster Wheels,Castor Wheels,Casters

10 SERIES Light Duty Castors 40 SERIES HEAVY DUTY CASTER Co.,Ltd , http://www.chsteelcaster.com