>>> Links: Analysis of the decoration of solid wood door selection wooden door prices how to calculate?
1. Construction Content
Wooden doors and windows can be divided into two categories of flat doors and windows and sliding doors and windows.
There are mainly three ways to transform the original doors and windows:
The first is to replace the original doors and windows, remove the original doors and windows, order or create new doors on site.
The second is the original door, frame does not move, carry on the decoration transformation, adds the high-quality veneer material on the original door leaf and makes the decoration model, the original frame preserves adds the bag door and the entrance.
The third method is to add windows and doors, that is, adding a new partition door in a doorless space, and adding decorative windows on the inside under the condition that the original window is not moving, in order to improve the sealing performance.
2. Construction process
(1) Flat open wooden doors and windows: The installation procedure for installing flat open wooden doors and windows is as follows:
Determine the installation location → pop up the installation location line → place the door and window frame in place, set → temporarily fix → correct the door and window frame with a line fall, level ruler, find a straight line → fix the door and window frame to → embedded in the wall → move the door and window fan Rely on the box → press the door to draw the height, width and width of the plane after trimming page slot → the position should be accurate.
(2) The installation procedures for hanging sliding wooden doors and windows are as follows:
Determine the installation location → Fix the top of the door → Fix the side frame plate → Hang the piece on the I-steel slide rail → Fix the I-shaped steel rail → Fix the lower rail → Install the door fan to take the special hole on the top of the head → Turn the door straight Lower rail pad leveling → Hanging Bolts and hanging pieces → Check the door edge and the side frame plate after the anastomosis → Fix the door → Install the face.
(3) The installation procedures for the push-pull windows are as follows:
Determine the installation location → Fix the lower frame plate → Fix the side frame plate → Fix the upper frame plate → Tick out the wooden slot equal to the thickness of the steel bar → The steel slide chute is stuck in the wooden slot → The special wheel box is stuck to the lower end of the window sash Stay in the hole → Install the sash on the track → Check the gap between the window edge and the side frame plate → Adjust → Attach the face.
3. Construction points
1. In the construction of wooden door and window covers, firstly, holes should be drilled in the wall surface of the base and the wooden molds should be lowered. The distance between the top and bottom of the wood mold is less than 300mm, and each row is less than 150mm.
2. Then, according to the width of the door and the width of the door and the width of the doorway, the large core board is sawed, and the round nail is used to fix it on the wall and the opening of the door. The round nail is to be nailed on the wood mold. After checking the underlying backing plate for security, fire retardant coating can be applied.
3. Doors, windows, doors, and decking veneers shall be plywood with beautiful patterns and smooth surfaces. The species of plywood shall meet the design requirements.
4. When trimming the veneer, first cut the cutting line according to the opening of the door and the width of the face, and cut it with a sharp knife. Shave the seam at a 45° angle, and then glue the latex on the back and stick it on the bottom plate. The gun is nailed into a straight nail without a cap.
5. The joints at the entrance of the door opening and the wall surface shall be straight and 45° angled to the seam. After the veneer is pasted and installed, it shall be closed with a wooden corner line, and the corner shall be shaved at a joint angle of 45°.
>>> Links: Wooden Doors Buying Knowledge - Solid Wood Doors
Decoration woodworking knowledge doors and windows wooden doors brand window wooden door decoration design decoration door price decoration partition partition door
Bucket Teeth Co., Ltd. , http://www.nsexcavatorparts.com