Bathroom wall tiles and floor tiles are more beautiful

Most families in the bathroom decoration will choose to affix ceramic tiles, because the bathroom often uses water and is relatively humid. The waterproof, moisture-proof, anti-fouling, and anti-fouling properties of ceramic tiles are better than other materials. There are too many colors, patterns, and specifications of tiles. This article mainly talks about the matching of wall tiles and floor tiles.


Before talking about collocation, let me talk about a few general issues.


1. Anti-slip is very important, especially in the shower area . Anti-slip is an important consideration for bathroom floor tiles. Safety is the most important. Floor tiles in the shower area can also be replaced with stone grooves. If you have an elderly person, you can consider installing handrails in the shower area. The bathtub itself is relatively slippery, so grab bars can also be added to the side of the bathtub.


A whole piece of marble is used to pull the groove in the middle of the shower area, in addition to non-slip, it can also guide the water to drain


Remember to choose a bathtub with grab bars, or add grab bars on the side


2.
Consider cleaning issues and do not use antique tiles with deep pits on the surface . Antique tiles are suitable for many styles, but one type of antique tiles is not recommended to be used as floor tiles, that is, the surface texture is relatively deep, because these pits are easy to deposit dirt and make cleaning difficult, and the same is not recommended. Tiles that are difficult to clean, such as patterned tiles.


It is difficult to clean tiles with heavy textures on the surface


Several suggestions for color matching of bathroom tiles:


1. The color and type of tiles in the same space should not exceed 3, otherwise it will appear chaotic;

2. Gray and black appear mysterious and advanced, but the space will appear dim, and the lighting must be well matched;

3. The color of the wall and floor tiles should be the same or lighter on top or darker on the bottom, otherwise it will appear "top-heavy";

4. Tiles or flower pieces should be decorated locally, and not suitable for large-scale use;

5. The texture of matte bricks is more advanced, but suction cup pendants cannot be used.


Examples of common collocations, see which one you like:


1

Conventional upper and lower separation



â–² Up and down color separation is a more conventional paving method


â–² Generally the top is shallow and the bottom is deep

â–²Usually the upper half of the wall is laid diagonally and the lower half of the wall is laid in the same color as the floor tiles



â–² The middle of the upper and lower separations is generally separated by a waist line


Custom Aluminum Composite Panel

Acm Panels are lightweight but rigid and durable aluminum composite material (ACM)-two strong sheets of aluminum bonded to a solid polyethylene core. The panel is prepared with canvas mounted on one-side and a mill (polished aluminum) finish on the other side. The panels are custom fabricated in inch increments from 6 to 24 inches. This weather-resistant panel is ideal for a wide range of paint mediums.
Compared to wood panels ACM panels offer a superior support for painting and mounting because ACM panels are virtually unaffected by environmental changes, such as relative humidity (RH) and temperature. This is a professional panel for oil and acrylic painting.

Acm Metal Panel,Aluminium Building Panels,Aluminum Cladding Sheet,Aluminum Decorative Panels

Shenyang Xiandai Jixiang Decorative Material Co., Ltd , https://www.modernbond-acp.com

This entry was posted in on