Tiles believe that everyone will be familiar with it, it can be said that this product has played a very important role in the decoration, no matter what kind of decoration style, are to use it. The following Xiao Bian will introduce to you the new Zhongyuan Ceramics is a few lines of brands and how to distinguish between ceramics and good or bad.
Xinzhongyuan Ceramics is a few brands
Xinzhongyuan Ceramics is the first-line brand, and this brand is the top ten polished brand in China in 2011. In the Chinese ceramics industry, it takes a certain position. The brand is produced in Guangdong and Sichuan, and there are agents in various places. The price is relatively moderate.
How to distinguish between good and bad ceramics
1, see the grade logo
Tiles can be divided into five grades. The difference between premium products, first grade products, second grade products, third grade products, and other foreign products is that because of so many levels, it will affect the price gap. Need to carefully compare.
2, see specifications
To know the qualified size, not only make people easier to construct, but also better reflect the decorative effect.
Whether the size meets the standard can be judged by the target. First, you can place the bricks on a flat surface and see if the four sides are completely in line with the flat surface. At the same time, see if the four corners of the tile are all right-angled. In general, the error of its side length does not exceed 0.2---0.3 mm, and the thickness error does not exceed 0.1 mm.
3, hardness
Tiles with good hardness, toughness, not easy to smash up to these top grade. You can try to scratch each other with the corners of the tiles so that you can see if the broken fragments are broken or loose to see if it is hard, brittle, or soft. Also observe whether it has scratches or scattered. The powder, if it belongs to the former, belongs to the top grade, and the latter is the product with poor quality.
4, pattern
In general, like a better tile pattern, the pattern color is clear and consistent, at the same time its process is also delicate and exquisite, no obvious leakage of color, dislocation, disconnection or inconsistency.
5, color difference
If you choose a tile with a color difference, this will affect the overall effect, not a batch of products, or the same batch may have color aberration phenomenon, so when choosing the time must not be sloppy, it is best to do for each Each packaged product must be sampled and compared so as to reduce the occurrence of color shading.
6. Listen to sound
It can be said that using a hard object to tap, if the sound is crisper, then the higher the porcelainity of the product, the better the quality. You can also use the left thumb, forefinger and middle finger to clip the corner of the tile, and hang it down easily. Tap the lower part of the tile with your right index finger. If you sound clear and pleasing, you can tell that it is a top grade product. .
7, drip test
The water droplets can be on the back of the tile to see how fast the water spreads after it spreads. If the water absorption is slower, then it means that the density of the tile is greater; on the contrary, the faster the water absorption, the denser the density, and the inherent quality of the former is excellent.
Summary: The new Zhongyuan Ceramics is a very good brand, and the brand is also recognized by many consumers. But you must learn to distinguish between good and bad when choosing ceramics. I hope that the above introduction will help you.
1.Application : For Medical Care
2.Dimension: Customized dimension, OEM & ODM
3.Material: A6063, A6061, A3003 and other series alu alloy
4.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
5.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine
|
OD |
OD Tolerance |
ID Tolerance |
Roundness |
Straightness |
Circular run-out |
|
φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
|
φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
6. STANDARD PACKING:Wooden case/carton
7. Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai
Extrusion Tube For Medical Care
Extrusion Tube For Medical Care,Medical Aluminum Extrusion Tube,Aluminum Extrusion Tube For Medical,Medical Aluminum Extrusion Pipe
Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com