There are many styles of wardrobes available on the market. Many consumers only pay attention to “face engineering†when they choose to purchase. They only care about whether the wardrobe is beautiful and practical. In fact, when using a closet, you need to open and close the closet. In this case, you need to withstand the most. The test is the closet door hinge. If the installation of the wardrobe door hinge is unreasonable, it will inevitably cause unnecessary trouble for the user in the future. So how to install the wardrobe door hinge? Below, Xiao Qi brings you the wardrobe door hinge installation skills , friends can come to understand and see.
A wardrobe door hinge installation skills
Closed-door hinges are often referred to as hinges in the industry and are mainly used for the connection of hardware accessories for cabinet doors and cabinets.
1. Install the hinged cup: firstly fix the cup with the flat countersunk chipboard tapping screw. Because the cup cup is plugged up, you can press the cup against the cupboard with the machine and fix it with the pre-opening hole (or Manually pressing the pre-cut hole in the entry panel can also be used.) Finally, the hinge cup is completely fixed by screwing the plug screw.
2, install the hinge hinge seat: try to choose the use of European-style special particle board bolt or pre-installed special plug screw fixed, and then directly press into the machine just fine (because the reel with a plug up the nature).
3, install the closet door hinge: the way is relatively simple, just connect the hinge seat hinge arm, and then press the hinged arm tail down, and finally gently press the hinge arm, the wardrobe door hinge is installed.
Second, how to adjust the wardrobe door hinge
Sometimes wardrobe door hinges are installed, but the closure is not smooth and can be adjusted in the following manner.
1, adjust the depth: the use of eccentric screws directly and wardrobe door continuously adjusted.
2, adjust the height: use the hinge base can be adjusted to adjust the height,
3, adjust the door cover distance: the need to cover the door to reduce the distance, you can let the screw turn to the right, so that the door can be better closed. On the contrary, if you want to increase the distance covered by the door, you can use a screw to turn left and you can effectively reduce the noise.)
4, adjust the spring force: You can adjust the door opening force, rotate a circle hinge adjustment screw. Spring force can be reduced to 50%.
Third, daily wardrobe door hinge maintenance
1. Wipe the hinge gently with a dry soft cloth. If the surface has hard-to-remove black spots, it is recommended to use a little kerosene;
2. If it is used for a long time, it may be normal to make some noises. In order to ensure the mute of the pulley, it is recommended to regularly add proper lubricant to the hinge every 2-3 months.
Conclusion of the article: It can be seen from this that the wardrobe door hinge installation technique is relatively simple. As long as it is installed according to the above steps, it can generally be successful. Due to the frequent opening and closing times of wardrobe doors, wardrobe door hinges are more likely to wear out. In addition to good installation techniques, it is usually necessary to pay more attention to the maintenance of wardrobe door hinges.
Wardrobe door hinge installation skills
C4B-16V Engine 8 Series: Power Range18KWm-2000KWm
Engine,18KWm-2000KWm
CCSN POWER GENERATION INC.(Engine is a subsidiary of CCSN) , https://www.ccsnengine.com