In the modern home decoration, the figure of the door and window can not be ignored. So, how should the doors and windows be installed? How to check it out? Let's take a look at it.
1. Check the appearance of doors and windows
The first big trick for acceptance of doors and windows is the inspection of the appearance. Generally, for the inspection of the appearance of doors and windows, we mainly look at whether its surface is dirty and whether there are scratches. Therefore, consumers must pay attention to its visual inspection when they accept it, so as not to be embarrassed.
2, check the door and window cover base
The second biggest trick for the acceptance of doors and windows is the inspection of the base of the door and window cover. Generally, when inspecting the base of the door and window cover, we must first look at its frame to see if it is stable. Second, look at its side panel to see if it has an empty drum. If there is an empty drum, it should be reinstalled.
3, check the hinge of the door and window
The third most important way to check the doors and windows is the inspection of the hinges. Generally for the hinge of the door and window, we mainly check its installation position to see if it is accurate. Second, it depends on whether it is flexible or not. If it is not flexible, it means that the screw is not good enough.
4, check the door and window lock
The fourth most important way to check the doors and windows is the inspection of the door and window locks. Generally for the inspection of door and window locks, we mainly look at its surface to see if it is flawed. In addition, we also need to see if the unlocking or closing is smooth. If it is not smooth, it should be removed and reinstalled.
Carbide Nonstandard And Wear Parts
Carbide Nonstandard And Wear Parts,Carbide Wear Parts,Carbide Engraving Pen Tip,Ski Pole Ferrules Tip Inserts
Zhuzhou Kerui Cemented Carbide Co., Ltd. , https://www.carbide-china.com