Glue can be divided into many types, but different industries have to use the corresponding glue. For example, the most indispensable ceramic tile and tiled ceramic tile adhesive is ceramic tile adhesive, which can be widely used in various wall tiles and floor tiles. So, what glue is used in decoration tiles ? The following Xiao Bian gave you a brief introduction of what glues are used for the tiles and how to use them .
First, what kind of plastic tile
1, deacetic acid type
The vulcanization rate of this type of rubber is very fast, and the transparency is very good. Acetic acid is easily released during the curing process and has a very strong taste. It is corrosive to metals, coated glass, and some inorganic materials.
2, dealcohol type TC
This tile adhesive has a smaller cure shrinkage and is less likely to be immersed in water, and most substrates are not corrosive. Adhesion to fluorocarbons, plastics, and marbles will be poor. If you work at high temperatures, the reaction will be faster, and small molecules will not be able to work in time to form bubbles, which will affect the quality of construction.
3, deacidification type
Acidic plastics are not suitable for use on cement and stone, because acid gum will cure to produce acetic acid, which will react with the surface of alkaline materials such as cement and stone, and the coefficient of expansion of the substrate is very large, and displacement or vibration may occur. If the construction is too thin, it can easily cause the surface of the neutral glue to wrinkle after curing. If the neutral glue is used together with the acid glue, it may cause yellowing of the neutral glue and thin glue.
Second, tile adhesive construction method
A. Clean up the construction surface first, and keep the surface to be firm, dry, clean, and free of stains.
B. Mix the tile glue in clean water into a paste. The proportion is 25 kg plus about 6 to 6.5 kg of water. After stirring well, wait for about 10 minutes and stir it up again. Use it after 2 hours or so. Do not use dried glue. Reuse glue.
C, tooth-type scraper will be spread on the wall glue, evenly distributed about one square meter, in the fifteen minutes like the tiles can be rubbed on. If you need to adjust, you need to fix the tile adhesive before it is fixed.
D. Take care to preserve the expansion joint. The product is suitable for use in an environment of 5°C to 40°C. After 24 hours, it can be stepped in or caulked.
Above about what kind of plastic tile used to simply introduce here, I hope to help you. For more information, please visit this website. Stay tuned.
Tile tile tile adhesive
Its density is only 091g/cm3, which is the lightest of the common chemical fibers. Therefore, the same weight of polypropylene can obtain higher coverage than other fibers. Strong stretch, polypropylene has high strength, large elongation and excellent elasticity. Therefore, C wear resistance is good. In addition, the wet strength of C is basically equal to Qian Qian, so it is an ideal material for making fishing nets and building ropes.
Pp Rope,Pp Braided Rope,Pe Pp Rope,Pp Rope Polypropylene Rope
Baoying Yiliyuan Rope And Net Co.,Ltd , https://www.ylyropes.com