- Model NO.: HL-20
- Application: Speaker Magnet, Industrial Magnet, Jewelry Magnet, Solenoid, Motor Magnet
- Product Name: 2014 New Permanent Magnet Manufacturer
- Model Number: Irregular Shape NdFeB Magnet Hl-20
- Product Certificate: RoHS
- Max Operation Temp: 220 Degree Centigrade
- Shape & Size: According to Your Design
- Trademark: COCO
- Origin: China Mainland
- Shape: Round
- Coating: Zinc
- Appearance: Various as You Wish
- Mold: NdFeB Magnet
- Company Certificae: ISO Ts16949:2009
- Coatings: Ni, Zn, Gold, Copper, Epoxy, etc
- Salt Sprat Test: More Than 48hr
- Specification: ROHS
- HS Code: 85051110
Product Name: 2014 new products neodymium permanent magnet manufacturer (HL-20)
Inquiry
To receive a quote for neodymium permanent magnet, please provide the following details:
(01) Outer Diameter, Inner Diameter or, Degree of Angle;
(02) Thickness, Length;
(03) Grades;
(04) Coating;
(05) Tolerances and Magnetization Direction (North on the Outside Face / South on the Outside Face / Magnetized through Circumference / Magnetized through Thickness ).
(06) Testing Conditions
MARK:
(01) magnets Samples and small quantity are available.
(02) All the inquiries, questions and emails will be replied within 1 hour.
(03) We have stock material for standard product.
In addition, if you customize permanent NdFeB magnets, please fax the specifications or your drawing to 0086-574-62947528.
Contact Person: Hola MB: 008615888186003
Highlight: Our Company Service
(01) My mobile phone: 008615888186003 Is always ready 24hours whole day.
(02) All the inquiries will be proceed in 30 mins, pls.
(03) If your design is irregular shape, I will offer you in 3 hours.
(04) will follow you once inquires receipt, until finish your order successfully. Don't like some company, any orders are followed by pointed persons who is not a sales, so mistakes might be made.
(05) The important thing is that I will pay most attention to product inspection in the whole process.
(06) My philosophy: To give my customers best product with best service as possible as I can.
Rare earth NdFeB magnets Production process:
Raw Materials-->Mixture--->Vacuum Melting--- > Powder Production--- >Molding ---> Vacuum Sintering--- > Testing--- >Mechanical Processing--- > Surface Coating--- >Magnetized--- > Inspecting--- > Packing and Shipping.
ND-fe-b magnets Directions of Magnetization:
A. Thickness Magnetized
B. Axially Magnetized
C. Diametrally Magnetized
D. Multi-poles magnetized
E. Radial Magnetized
F. Customized specific requirements magnetized
Stainless Steel M type Press fittings and V type Stainless Steel Press fittings pipeline system is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas,
industrial petroleum pipeline system etc.
Compared with traditional pipeline system, it`s not only more economical, safer and healthier, but also easier and faster for
installation with longer service life.
1. Stainless Steel M Type Press Fittings range:
Coupling -- Equal coupling, Reducing coupling, Slip coupling, coupling with male/ female threads;
Elbow -- Equal elbow, Elbow 90°, Elbow 45°, Reducing elbow, Elbow with plain end, Elbow with wall plate, and Elbow with male/ female threads;
Tee -- Equal tee, Reducing tee, Tee with wall plate, and Tee with male/ female threads;
Others-- Pipe cap, Pipe Bridge and Flange connector.
2. Stainless Steel M Type Press fittings Material: Stainless steel 304L, Edelstahl 1.4306/ Edelstahl 1.4301, AISI304L, Inox304L;
Stainless steel 316L, Edelstahl1.4404, AISI316L, Inox316L;
Galvanized carbon steel, 1.0034C-Stahl,Kohlenstoffstahl, ACCIAIO AL CARBONIO.
3. Stainless Steel M Type Press Fittings Size: 3/8``-4``inch or as request, pipe wall thickness: 1.0--2.0mm
Sizes range:
DVGW W534:1995: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108mm.
JIS G 3448-1980: 15.88, 22.22, 28.58, 34.00, 42.7, 48.6, 76.1, 88.9, 108mm.
4. Stainless Steel M Type Press Fittings Standard:
Press fitting standard: (DIN) DVGW W534-1995; (JIS) JWWA G116:2001; GB/T 19228.1-2003
Pipe standard: DIN10312:2003; GB/T 19228.2-2003
O-ring sealing standard: CEN EN 681-1:2006; GBT 19228.3-2003
5. O-Ring Seal: "Chlorinated butyl rubber" (CIIR), EPDM, HNBR, NBR and FKM, etc.
EPDM (black): max working pressure 16bar, working temperature from -20℃ to 120℃,
Suit medium: cold and hot water, compressed Air etc.
6. Press Fittings Galvanization: all carbon steel pipe fittings are plated with rust-resistant zinc.
7. Anneal: all stainless steel M type press fittings are annealed in inert gases before packing.
Stainless Steel Press Fittings Installation and Connection Order
Equipments And Quality Control
Orderly Workshop
Efficient Anneal Equipment
Pressure Testing
Tensile Testing
Stainless Steel M Profile Press Fittings(DVGW)
Stainless Steel M Profile Press Fittings,Female Tee Press Pipe Fitting,Stainless Steel M Type Press Fittings,Din Standard Press Fittings
WENZHOU KASIN VALVE PIPE FITTING CO., LTD. , http://www.kasinpressfitting.com