Part1: Cabinet door panel acceptance to create a beautiful appearance
The door panel of the cabinet is the key factor affecting the aesthetics of the cabinet. The cabinet door has many styles and materials. When installing the cabinet door, we should check the cabinet door, including the surface, material and installation effect.
1, the door color number
The color of the door panel is for the cabinet you have customized. Pay attention to whether the cabinet door panel is the same as the color number you selected at the time. The material is the same, the surface should be free from damage, and the overall color of the door panel should be the same. Because all custom cabinets should be made according to your requirements, if the color number or material is wrong, it is likely to affect the overall layout and use of your kitchen.
2, the door panel flatness
The door panel must be flat and free of blistering, and the shape of the door is originally ordered; if there is a door panel with a sealing edge, the color of the sealing edge meets the requirements at the time of ordering. For the flatness of the door panel, we can open and close the cabinet door, repeating it several times, and then measuring it with a level. If the flatness is not as good as expected, immediately respond to the ordering party and deal with it in time to avoid affecting the use.
3, the appearance of the door panel
The installation of the door panels should correspond to each other, the height should be consistent, and the width of all the slots should be the same; the handles should be on the same horizontal line. These acceptance details require careful and careful inspection to ensure that the cabinets you have ordered are in line with your own expectations. In addition, it is necessary to check whether the handle and the door leaf are scratched, damaged or rusted.
Part2: Cabinet countertop acceptance is the key to durability
The countertops of the cabinets must be durable. A good cabinet, the material of the cabinets, durability, wear resistance and other properties are very important. When installing the cabinets, there are often problems such as table scraping, sink inlay problems, and too large countertops. .
1, the stone surface is smooth
The countertop stone of the cabinet should be smooth and not rough. Make sure that there are no pores on the surface, oil and water stains are not easy to penetrate into it, and there is no unevenness. This is the basic item for stone countertop acceptance.
2, the stone surface is flat, with or without cracks
The stone countertop should be free from cracks and the mouth should be smooth. The size of the basin and the stove should be reasonable. The faucet should be installed firmly and the water pipe should be leak-free.
At the intersection of the countertops, no obvious signs of cementation can be seen, and the glue must be smooth. For the artificial marble joints, the two-meter stand can not directly see the seam marks, and it is qualified.
3, the hardness of the stone
The hardness of the stone is related to your choice of materials, and the hardness of different materials is also different. The hardness of the stone is hard and hard, the scratch resistance is very outstanding, and the wear resistance is good. If the hardness of the stone is small, it will be easily eroded by water and moisture when used for a long time. If it is used improperly, it will lead to degumming, deformation, and expansion of the substrate.
Part3: Cabinet accessories acceptance small body large as
Don't underestimate the accessories of the cabinet. The small accessories affect the connection and use of the whole cabinet. If the quality of the cabinet accessories and the installation are not enough, the durability of the cabinet will be greatly reduced.
1. Is the handle installed firmly?
The installation of the handle is related to the durability of the use. The handle is a common part of the cabinet. Make sure that the handle is securely installed. It is also necessary to reserve enough space for the opening and closing of the cabinet. If the cabinet is opened and the door frame is in contact with it, this is unqualified.
2. Is the fixing screw firm?
Although the hardware accessories are small, it is the key to the quality of the cabinet. Most consumers lack the basic judgment of the advantages and disadvantages of hardware accessories. In fact, hardware accessories play an important role in the whole set of cabinet materials, and its advantages and disadvantages directly affect the quality and service life of cabinets. Therefore, it is important to check whether the screws are fixed and there is rust.
3. Is the edge sealing tight?
The sealing edge of the high-quality cabinet is smooth, smooth and feels good. The sealing line is straight and smooth, and the joint is fine. The professional manufacturer uses the straight edge banding machine to complete the steps of edge sealing, broken head, trimming, chamfering and polishing. The glue is evenly applied, and the pressure of the sealing edge is stable, ensuring the most accurate size. The workshop-style small factory uses a brush to apply glue, manually presses the edge seal, trims the edge with a crepe paper cutter, and polishes it with a manual polishing machine. Due to uneven pressure, many places are not strong, and formaldehyde and other toxic gases are volatilized. in the air.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng cabinet network "; you can view the popular article " One beauty opened the cabinet store, earned a bird in half a year! ", want to communicate with peers can join the Jiuzheng building materials network cabinet exchange group]
Standoffs, sometime called spacers because of the function they serve, are used in the sign and display industries to set displays off the surface they are mounted on to make them stand out.6061-T6 and 7075-T6 aluminum material are available. Threaded inside,large range of the length,could be used in Drone,RC control, Airplane, DIY toys as well. Welcomed by people around the world.
Hardware consists of at least a screw or hangar bolt and often an anchor specific for the material where you are mounting it.Stanoffs offer drone more space to put other accessories, like camera.
The aluminum-made standoffs are mostly machined from aircraft grade aluminum, which is anodized to a soft satin finish to look professional, and designed to be easy to maintain or clean.
Besides aluminum standoffs,we have nylon standoffs and others.Custom-made products are available as well.
Stainless Steel Standoffs,Steel Hex Standoffs,Brass Glass Standoffs,Carbon Steel Standoffs
Hobby Carbon CNC Technology(Shenzhen) Limited , https://www.hobbycarbon.com