1: Plate
The main advantages of plate materials are that they are not easily deformed, the quality is stable, and the moisture is more than the dry wood furniture. Take the table as an example. During this process, we often drink will inevitably have spilled things if the surface of wood furniture, wood It will absorb water on the surface for a long time and it will lead to expansion and will have a huge impact on the wood itself. If shaved, it will be easy to solve this problem. Will not be affected by moisture and dryness. It can also be eased during use, and the most important thing is that the cost will also be reduced.
Two: solid wood frame
The advantages of solid wood are strong and durable. The slower the growth cycle of wood, the greater the density, and the harder the material. The main reason for the solid wood frame is that it can withstand pressure well and is not easily broken.
Most of our home decorating floors are made of tiles or wooden floors. There are few ordinary floors and the water is clean. The floor is relatively small. Wood cannot be deformed due to humidity.
Many customers will consider why they do not use metal to make the frame, not to be more sturdy. In general, the metal frame we see is fixed with iron pipes and steel pipes. First, the quality of the metal pipe is hard and cold, the sound is loud and the tone is single, and secondly, the stability, hardness and bearing capacity are not the resistance of the wood. .
U3000 U3000
Three: wood and wood combined furniture and plates, wood comparison:
Furniture is a wood-based panel. Plastics and wood are used to extrude glue at high temperatures and contain a lot of formaldehyde. If the purchase price is too high, it will cause great harm to the human body. Formaldehyde-free panels are even more expensive than some types of wood.
Although solid wood itself has no harmful gases and substances on the human body, its price is quite high and many families cannot afford it. If the amount of wood is relatively small, it may not be durable, and regular maintenance is required after damage.
The combination of wood and wood absorbs the advantages of two pieces of furniture, avoiding the concerns of many consumers, such as price, quality, color matching, product life, and so on.
Four: How to Buy and Buy Wood
Solid wood furniture, in addition to mirrors, hardware and panels in the same category with round logs and sawn furniture; now see more solid wood furniture is a kind of raw wood sawn wood furniture production of the same substrate, furniture is all solid wood furniture, There are no two; moreover the framework is solid wood furniture. That is, logs and sawn timber are made from furniture made from logs.
In fact, solid wood furniture also has all-solid wood furniture, solid wood furniture and solid wood frame furniture, and solid wood furniture. In addition to mirrors, hardware and boards, round logs and sawn furniture are used in the same category; now more solid wood furniture is seen as a kind of log. Sawn timber furniture produces the same kind of substrate, furniture is all solid wood furniture.
Recommended Answer: After the house is renovated, we often consider what kind of sofa, bed and office furniture to buy. Can buy solid wood furniture, you can also choose plate furniture. Finally, in addition to the difference between the two, which one is more suitable for their respective advantages and disadvantages below, so that solid wood furniture and panel furniture to a big PK! (The following article is available with a letter for small furniture.) The advantages of down-skin-based furniture components are usually a variety of metal parts, which are very easy to assemble and disassemble, have high machining accuracy, and can be repeatedly disassembled and installed. Because of the variety of veneers, changes in color and texture can give people different feelings. They also have many changes in the design, are individual, not easily deformed, easy to operate, especially the panel furniture in the following aspects is better than solid wood furniture. The price of the price plate is several times that of solid wood furniture (compared to the precious trees of rosewood and huanghuali). Substrate-quality furniture is used in high-quality chipboard (also known as MDF). The quality of the particle board is that there is no worm-eaten, no rot, no discolored wood to remove the scar, and the heart of a tree is dried and polished. The defects were made into two kinds of granular and fibrous materials. A small amount of glue is added to the two-material layered mixture, and then 400 tons of mechanical equipment pressure on the film, so the finished plate is high density, compact structure, stable performance, so the plate furniture is not easy to deform, its bending strength is not lower than even a few high In pure wood. Previously it was just a simple dry-processed solid wood furniture. The uneven moisture content of wood furniture will appear deformed, cracking phenomenon humidity.Three change the environment. The surface treatment of wooden furniture is painted with a paint. The paint in the air will gradually lose its luster after being oxidized and yellowed. It will take care of more troubles, and the furniture surface will be decorated with melamine fireproof fat and alkali-resistant, not yellowing, and not deformed. Wear-resistant melamine resin is a high hardness. General metal will not leave scratches. Paint is a soft material. It is easy and not scratch-resistant. Fire melamine resin itself is a fireproof material, non-combustible, but the coating is a kind of easy to burn material, does not have fire, acid and alkali resistant melamine resin has a certain degree of acid and alkali resistance, general acid and alkali will not damage it surface. The physical properties of the oil are not stable, and it is easily burned by acids and alkalis, loses surface brightness and even removes paint. The disadvantages of wood-based panel furniture are mainly environmental protection. If we make furniture with materials such as particle board, if they are not covered and sealed, they will easily release formaldehyde, pollute the environment and cause harm to the human body. In general, open the door or drawer, if there is a strong irritating odor, it is more than formaldehyde exceeded, this type of furniture should not be purchased.
At the same time, the lifespan of panel furniture is generally 5-6 years, and its service life is shorter than that of solid wood furniture and wooden furniture. Natural, environmental, and healthy solid wood furniture displays the original beauty of nature. The prosperity of solid wood furniture. It can be analyzed from the following aspects: European solid wood sofa. First of all, in the mid- and long-term use.two of solid wood paint, with or without glued surfaces, and relatively stable physical properties. The utilization rate of wood is higher and it is in line with the principle of ecological utilization of raw materials. Therefore, in the use of colors and textures, solid wood fancy decorative boards are more suitable for use and decoration furniture.Three. Although the wood plate size is larger than the width of the solid wood plate, the double-clad thick veneer is protected, and the edge of a thick veneer is actually only two quadrilateral 8 glue seams, so the wood veneer seams pass through the volatile chemicals far below the jigsaw's Volatile and wood solid wood material width, more environmentally friendly and more healthy.four. Since the core board is used for anisotropic small wood splicing, balance board and warpage degree, the two upper and lower sides cover two thickly cut single boards, which can eliminate surface warpage, deformation and cracking phenomenon, and can improve all directions.five board Physical strength. Sliced ​​thick veneers have large diameter top logs and are rigorously screened for texture and color, using scientific equipment and high-precision design and manufacturing methods. Such a process, in the traditional sense of texture, color is very good, texture painting is more prominent, furniture production to create a sense of harmony and high value, we all know that solid wood furniture has the disadvantage of not easily deformed, maintenance difficulties. However, what's more troublesome is the following questions. First, because each panel has a different texture, the hardness of the crucible is also different.
Even with a thick sanding machine, it is impossible to make the thickness of each panel uniform, resulting in a sheet surface. After painting, the uniform height of the slats is more obvious.two. If the cross stitching quality is poor, the obvious glue seams will spell. If the transverse strength is not enough, it is easy to crack at the seam. Therefore, the furniture made of wide solid wood panels generally has a diagonal look between the furniture lacquer and the horizontal slat glue. This phenomenon will be smaller, but it cannot be fundamentally avoided. More than three. The anisotropy of the wood is wide-brake and easily deformed. In addition, the gap between the plastic seams of the board can be visually seen, and the degree of influence of the cracks between the jigsaw puzzles and the degree of influence of the cracks in the strong splicing board, together with the wood effect The coating process and coating of the water, or even just the processed product, is very smooth, and the daily use of the wide board surface of the wood is easily cracked from the edges, resulting in uneven glue. This phenomenon is more pronounced due to the humidity of the air for a long period of time. In addition, the width and width of the base material of the puzzle plate are more obvious.four. The furniture produced by this process requires high quality materials. The color, texture and age of the splicing are all basic requirements. The wood has low utilization rate, large waste and high cost, especially the growth length of the wood determines the hardness of the wood and directly affects the deformation probability of the wood during use. This feature is almost no difference between household products, it can only be found in use, in order to let you know that furniture and solid wood furniture can be more intuitive, the following examples, style aspects, disassembly, price, environmental protection and PK's useful life, if You like to see these differences, you are not in the solid wood furniture and panel furniture have more understanding? u841d u535c u9752 u83dc u5404 u6709 u6240 u7231 uff0c u5176 u5b9e u6700 u91cd u8981 u7684 u662f u9002 u5408 u81ea u5df1 u3002 is a good plate furniture or Solid wood furniture
The details of the problem: Some people think that solid wood furniture is eco-friendly, natural, and of high value. But some people say that furniture is fashionable, economical, easy to assemble, easy to match, is wood furniture better than plate furniture?
Recommended Answer: It should be solid wood furniture board structure due to the above trip that most of the three pieces of furniture connection disassembly performance, the long connection will gradually with the furniture material is the density of formaldehyde or particleboard particle content drops, and more importantly, there are some children's body hurt. Solid wood furniture not only can be used in most of his squat structures, but also has a more durable hierarchical structure. It is also more environmentally friendly and harmless to the human body to regulate indoor humidity. How to promote the effective promotion of children's solid wood furniture products in three or four-tier cities
Problem Details: Now, from a baby's sales data, parents are very interested in low-priced panel furniture, but how to improve the safety and environmental protection of children's solid wood furniture?
Recommended answer: Thank you for your invitation.
How to effectively promote children's solid wood furniture products, I talk about how to achieve effective publicity. First of all, first of all worry about consumers buying children's furniture (most important and easily overlooked)
The so-called effective communication, in order to achieve the shortest time, the least cost, to send products to consumers, to ensure the safety of children is the first parent. For the safety of solid wood children's furniture, the shortest language is used to prove the most powerful proof of the product's safety. It is best to find the difference from the competitor's product.two. Serve the appropriate ads
With good product differentiation positioning, we can further enhance the brand.
If the cost is not enough, you can boldly wear local children's programs. There are some accurate online advertising campaigns. The first is the familiar face, which is to increase brand recognition. After a period of time, we can do some big offline activities to make the brand aware of the brand's good feelings and turn this good feeling into reality.
If the cost is relatively small, some suggestions on the radio, you can send some DM to a small city and do some promotional activities.Three. Properly do some experience
You can do some appropriate off-line experiences with some partners, for example, on-site testing of formaldehyde activities, etc. to increase the brand's influence. Through community activities, accumulated customers and potential customers can maintain a certain degree of interaction.
Shuanghu Furniture (furniture) and Changchun Shuanghu Furniture (furniture).
Chengdu Shuanghu Industry Co., Ltd. is located in the furniture manufacturing base in the southwest region: Pengcheng Furniture Manufacturing Corridor - Pengzhou, 20 minutes from Chengdu. The company was established in 1989. After 18 years of hard work, the company's scale development covers an area of ​​1,600 acres, employs more than 8,000 people, and has fixed assets of several hundred million US dollars. The company integrates R&D, manufacturing and marketing, and is the largest plate furniture production and supply base in China.
Precision Steel Tube are produced by Cold Drawn and Cold Rolling, with very good OD and ID tolerance and smoothness ,
with very good Concentricity, Good Ovality, Good Roundess, Less Deviation, suitable for machinery and CNC machining part, for auto parts.
Cold Drawn Seamless tubing (also known as CDS steel tube. Cold Drawn Seamless tubes offer tight tolerances compared to Hot Finished Seamless tube, and offers stronger physical properties compared to other mechanical tubing.
CDW Steel Tubes is made by drawing the ERW tubes from the tube mills through a plug and die combination, mounted on the draw bench. The end tagged and annealed tubes are drawn through a closely machined die that controls the outside diameter of the tubes. At the same time the tube passes over a plug that controls the inside diameter. Further, the manufactured tubes are processed by the downstream facilities for different industry applications.
Technical Standard according to:
ASTM A513, ASTM A519,
DIN2391, EN10305-1, EN10305-2, EN10305-4,
SAE J 524, SAE J525 etc.
Delivery Condition:
Cold Finished ( BK, C/W, without heat treatment)
Normalized (+N)
Stress Relieved Annealed (+SRA)
Steel Grade:
SAE 1010, SAE 1020, SAE 1026, SAE 4130, SAE 4140.
ST35.8, ST37.0, ST52, E235, E355, 42CrMo4,etc
Sizes:
OD: 4.0 to 350mm
WT: 0.5 to 50mm
Length: Cutting Length available, max 12000mm according to Customer PO.
Precision Steel Tube
Precision Steel Tube,Welded Precision Steel Tubes,Seamless Precision Steel Tube,Din2391 Seamless Precision Steel Tube
TORICH INTERNATIONAL LIMITED , https://www.steeltubepipechina.com