China-Radial-Oriented-Ferrite-Ring-Magnet-for-Electronic-Idle-Speed-Motor-and-Other-Stepper-Motor-Rotors

Radial Oriented ferrite ring Magnet for electronic idle speed motor and other stepper motor rotors :


Specification of Radial Oriented ferrite ring Magnet :

    Ferrite or ceramic magnets are still the most widely used magnets with a maximum energy product of 1 to ± 4.3 MGOe. Due to the environmental requirements which are becoming more stringent barium ferrite has been replaced bystrontium ferrite during the last years. Ferrite is the cheapest magnetic material and has a high corrosion resistance making coating unnecessary.This magnetic material is hard and fragile and must be processed with diamond, preferably when it is not in a magnetic state.Because it might shrink during the sinter process a tolerance of ± 2 % should be taken into account when determining the dimensions. If grinded ± 0.1 mm.Tighter tolerance is available on request. Ferrite magnets can be supplied both isotropically and anisotropically, they are used in the most divergent products such as loudspeakers, magnetrons, measuring devices, toys, engines, reed contacts etc. The maximum temperature of use is 225°C depending on the specification, dimensions and system design. For specifications: See the table below. The minimum dimension for block magnets is 2 x 2 x 2 mm, whereas the maximum dimension for this type is 270 x 90 x 25.4 mm.The minimum dimension for disc magnets is D 2 x 1 mm, whereas the maximum dimension for this type is D 156 x 25.The minimum dimension for ring magnets is D8 x 2.5 x 3 mm, whereas the maximum dimension for this type is D 256 x D* x 25 mm (* inside diameter in consultation).Follow size we have mold:
 
P/N OD ID H
 211  24  18  18.2
 221  29.972  19.8374  30.734
 222  34  24  24.5
 223  13.985  9  13
 225  79.25  66.55  21.59
 226  38.7  15.8  35
 227  53.7  34.7  24
 228  19  (6.5-6)  25
 229  12.192  7.366  12.344
 230  36.6  8  21
 231  36.6  8  21
 232  38.7  15.8  25
 
Chinese Standard
Material Br Hcb Hcj (BH)max
mT KGs KA/m KOe KA/m KOe KJ/m3 MGOe
Y10T 200~235 2.0~2.35 125~160 1.57~2.01 210~280 2.64~3.52 6.5~9.5 0.8~1.2
Y20 320~380 3.2~3.8 135~190 1.70~2.38 140~195 1.76~2.45 18.0~22.0 2.3~2.8
Y22H 310~360 3.1~3.6 220~250 2.77~3.14 280~320 3.52~4.02 20.0~24.0 2.5~3.0
Y23 320~370 3.2~3.7 170~190 2.14~2.38 190~230 2.39~2.89 20.0~25.5 2.5~3.2
Y25 360~380 3.6~4.0 135~170 1.70~2.14 140~200 1.76~2.51 22.5~28.0 2.8~3.5
Y26H 360~390 3.6~3.9 220~250 2.77~3.14 225~255 2.83~3.21 23.0~28.0 2.9~3.5
Y27H 370~400 3.7~4.0 205~250 2.58~3.14 210~255 2.64~3.21 25.0~29.0 3.1~3.7
Y30 370~400 3.7~4.0 175~210 2.20~2.64 180~220 2.26~2.77 26.0~30.0 3.3~3.8
Y30BH 380~390 3.8~3.90 223~235 2.80~2.95 231~245 2.90~3.08 27.0~30.0 3.4~3.7
Y30-1 380~400 3.8~4.0 230~275 2.89~3.46 235~290 2.95~3.65 27.0~32.0 3.4~4.0
Y30H-2 395~415 3.95~4.15 275~300 3.46~3.77 310~335 3.90~4.21 28.5~32.5 3.5~4.0
Y32 400~420 4.0~4.2 160~190 2.01~2.38 165~195 2.07~2.45 30.0~33.5 3.8~4.2
Y33 410~430 4.1~4.3 220~250 2.77~3.14 225~255 2.83~3.21 31.5~35.0 4.0~4.4
Y35 400~410 4.00~4.10 175~195 2.20~2.45 180~200 2.26~2.51 30.0~32.0 3.8~4.0
 
USA Standard
Material Br Hcb Hcj (BH)max
mT KGs KA/m KOe KA/m KOe KJ/m3 MGOe
C1 230 2.3 148 1.86 258 3.5 8.36 1.05
C5 380 3.8 191 2.4 199 2.5 27 3.4
C7 340 3.4 258 3.23 318 4.00 21.9 2.75
C8(=C8A) 385 3.85 235 2.95 242 3.05 27.8 3.5
C8B 420 4.2 232 2.913 236 2.96 32.8 4.12
C9 380 3.8 280 3.516 320 4.01 26.4 3.32
C10 400 4.0 288 3.617 280 3.51 30.4 3.82
C11 430 4.3 200 2.512 204 2.56 34.4 4.32
 
Europe Standard
The standard from International Electronics Committee (IEC404-8-1)
O×100=Y10T=C1   ×300=Y30=C5   O×330=Y30 BH
Grade Allowed Value (min-typical)
Br Hcb BrHcj (BH)max
mT KGs KA/m KOe KA/m KOe KJ/m3 MGOe
HF8/22 200-220 2.00-2.20 125-140 1.57-1.76 220-230 2.76-2.89 6.5-6.8 0.8-1.1
HF20/19 320-333 3.20-3.33 170-190 2.14-2.39 190-200 2.39-2.51 20.0-21.0 2.5-2.7
HF20/28 310-325 3.10-3.25 220-230 2.76-2.89 280-290 3.52-3.64 20.0-21.0 2.5-2.7
HF22/30 350-365 3.50-3.65 255-265 3.20-3.33 290-300 3.64-3.77 22.0-23.5 2.8-3.0
HF24/16 350-365 3.50-3.65 155-175 1.95-2.20 160-180 2.01-2.26 24.0-25.5 3.0-3.2
HF24/23 350-365 3.50-3.65 220-230 2.76-2.89 230-240 2.89-3.01 24.0-25.5 3.0-3.2
HF24/35 360-370 3.60-3.70 260-270 3.27-3.39 350-360 4.40-4.52 24.0-25.5 3.0-3.2
HF26/16 370-380 3.70-3.80 155-175 1.95-2.20 160-180 2.01-2.26 26.0-27.0 3.2-3.4
HF26/18 370-380 3.70-3.80 175-190 2.20-2.39 180-190 2.26-2.39 26.0-27.0 3.3-3.4
HF26/24 370-380 3.70-3.80 230-240 2.89-3.01 240-250 3.01-3.14 26.0-27.0 3.3-3.4
HF26/26 370-380 3.70-3.80 230-240 2.89-3.01 260-270 3.27-3.39 26.0-27.0 3.3-3.4
HF26/30 385-395 3.85-3.95 260-270 3.27-3.39 300-310 3.77-3.89 26.0-27.0 3.3-3.4
HF28/26 385-395 3.85-3.95 250-265 3.14-3.33 260-275 3.27-3.45 28.0-30.0 3.5-3.8
HF28/28 385-395 3.85-3.95 260-270 3.27-3.39 280-290 3.50-3.60 28.0-30.0 3.5-3.8
HF30/26 395-405 3.95-4.05 250-260 3.14-3.33 260-270 3.27-3.39 30.0-31.5 3.8-3.9
HF32/17 410-420 4.10-4.20 160-180 2.01-2.26 165-175 2.07-2.20 32.0-33.0 4.0-4.1
HF32/22 410-420 4.10-4.20 215-225 2.70-2.83 220-230 2.76-2.89 32.0-33.0 4.0-4.1
HF32/25 410-420 4.10-4.20 240-250 3.01-3.14 250-260 3.14-3.27 32.0-33.0 4.0-4.1


Flavorings

Emulsifier,Acidity Regulator Co., Ltd. , http://www.nutrition-enhancer.com

This entry was posted in on