Diamond grinders are a kind of hardware machinery products that are often used in modern industry. In general, the operation of diamond grinders requires professional training. Therefore, it is necessary to pay more attention to the operation of diamond grinders. Usually people In the process of operating diamond grinders, the following major problems often occur. Therefore, Xiaobian hereby summarizes the following for you, hoping to help more people understand how to operate diamond grinders and to pay attention to the process of operating diamond grinders. What matters.
1. Side grinding:
In the daily use of the grinder, it is also necessary to classify the grinder, but in the daily use process, many operators do not use the type of grinder, and use the side of the grinding wheel to grind at random, which is a serious violation of safe operation. Violation of the rules of operation. According to the regulations, the grinding wheel with the circumferential surface as the working surface should not be grounded. The radial strength of the grinding wheel is large and the axial strength is very small. When the operator is too strong, the grinding wheel will be broken and even hurt. In practice This behavior should be prohibited during use.
2, positive operation:
In daily use, many operators are always accustomed to working on the grinding wheel because the direction can be used. In fact, this behavior is a special prohibition in the operation of the grinder. According to the operating procedure, when grinding the workpiece with a grinder, the operator should stand on the side of the diamond grinding wheel and must not operate on the front side of the grinding wheel to avoid the grinding wheel flying out or the grinding wheel breaking and flying out and hurting when the grinding wheel fails.
3. Hard operation:
In the use of grinders, some operators, especially younger operators, are trying to grind quickly and use too much force, which is a very unsafe operation. The flatness of any grinding wheel has a certain strength, which is likely to cause the grinding wheel to break, or even fly out and hurt people, it is also a behavior that should be prohibited.
In short, the wheel operator needs to have a certain level of professionalism. If you need a place to use the grinding wheel, then Xiaobian suggests that you should find a professional operator to operate it, and you can also perform the operation test according to the above method. Oh!
Concerned about surprises
Tag: Diamond Grinding Machine Operation Precautions
Previous: Precautions for installation and use of electric control valve Next: What are the technical requirements for hooks?
It is a typical silicate material made of natural raw materials such as feldspar, clay and quartz. The main constituent elements are silicon, aluminum and oxygen. These three elements account for 90% of the total amount of crust elements. Low cost and mature technology. Such ceramics can be divided into daily-use ceramics, architectural ceramics, electrical insulating ceramics, chemical ceramics, etc. according to their performance characteristics and uses. It is made of high-purity synthetic raw materials and is formed by precision control process. It generally has some special properties to meet various needs. According to its main components, there are oxide ceramics, nitride ceramics, carbide ceramics, cermets, etc.; special ceramics have special mechanical, optical, acoustic, electrical, magnetic, thermal and other properties. According to different uses, special ceramic materials can be divided into structural ceramics, tool ceramics, and functional ceramics.
Other Materials,Zirconia Porous Ceramic Foam Filters,Silicon Carbide Ceramic,Sic Ceramic Moulds
SHENZHEN HARD PRECISION CERAMIC CO.,LTD , https://www.hardcm.com