How to identify NTN bearings through sound

Source: China Bearing Network Time: 2014-08-16

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The sounder is selected to check the size and sound quality of the rolling sound of the bearing in operation; even if the bearing has slight peeling and other damage, the abnormal sound and the irregular sound will be announced; the Japanese NTN bearing sounder can be distinguished.
Listening to the use of hearing to identify irregular work is a very general approach. For example, using an electronic stethoscope to detect abnormalities in a part is often experienced by the operator.
If the bearing is in an excellent transition situation, it will announce a low humming sound. If a sharp voice is announced; the voice and other irregular sounds; often indicate that the bearing is in a bad connection situation.
Sharp å±å± noise can be caused by improper smoothness. Inappropriate bearing clearances can also form metal sounds. The dents of the concave trajectory on the outer ring track of the bearing can cause oscillation; and form a smooth and loud sound. Because the knocking flaws formed by the device will also cause noise; this noise will be different from the bump of the bearing speed.
If there is intermittent noise, it means that the rolling part can be damaged. This sound is an attack when the damaged appearance is overburdened; if there is a pollutant in the bearing, it often causes a squeak. The severe same bearing damage will occur irregularly. And grand noise.
Bearing damage can of course be detected by hearing to detect NTN bearings. However, it is now necessary for the bearing to be replaced immediately. Therefore, better methods such as the use of electronic condition monitoring instruments. Use a wooden stick than the old method. More accurate estimation of bearing conditions.

Recommend to friends comments close window

Bearing related knowledge

Analysis of the problem of rolling bearing repair
The problem that KOYO bearing should be dealt with when it is excited. The details of bearing faults and the reasons for failure are the application of bearings - mining and processing commonly used miniature bearing types

This article links to http://
Please indicate the bearing network http://

Previous:The equipment and application of the wheel bearing are concerned. Next:The device of the cone crusher thrust bearing

Wooden Handle Corkscrew is for wine but it can also use as normal Beer Opener.

The handle is made of wood such as pakka wood, beech,rubber wood etc.

The wood handle looks more elegant and high quality.

And these kind of corksrew is suitable as a gift for a good taste wine.

The wood handle can be laser with custom logo then pack to a good gift box.

It is believed that it will attrative your custom not just for wine but also the corkscrew.

Wooden Handle Corkscrew

Wine Bottle Opener,Wooden Handle Corkscrew,Corkscrew Bottle Opener,Corkscrew Can Opener

Yangjiang Huanyu Industry and Trade Co.,Ltd. , https://www.yjhymfg.com