Oscillating bearing features

Home>Bearing knowledge>Oscillation bearing features
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Oscillating bearing features

Source: China Bearing Network Time: 2014-09-10

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. Appearance characteristic oscillation bearing:
A. The diameter of the roll body is increased; the length of the roll body is increased.
B. Hold the frame by the outer ring rib to guide the roller; reduce the force on the roller.
C. Use the inner ring rib to guide the roller; improve the roller operation.
D. The cylindrical roller bearing adheres to the frame with an integral layout; the strength is greatly improved.
E. The outer diameter of the aligning bearing is depicted with oil groove oil hole; smooth effect is good.
Usually bearings:
A. The roller body diameter and the roll length are both small.
B. Stick to the roller or inner ring guide.
C. The cylindrical roller bearing adheres to the rivet layout; it is easy to loosen and cover.
D. The outer diameter of the aligning bearing has no oil groove oil hole; the smoothing effect is poor.
2. Select the special bearings for data oscillation:
A. The inner and outer rings and the rolling body are made of vacuum degassing bearing steel; the fatigue resistance is good.
B. Adhere to the selection of aluminum iron manganese bronze data; high strength; good elasticity; better wear resistance.
Usually bearings:
A. The inner and outer rings and the rolling body are usually made of bearing steel.
B. Adhere to the selection of zinc brass raw materials; low strength; poor elasticity.
3. Heat treatment method for oscillating special bearings:
A. The inner and outer rings are selected from Bay-Machine mixed quenching or Martens quenching + high temperature tempering; the hardness is uniform; the internal stress is 蝗 茫豢 茫豢 茫豢 寤骱 寤骱 寤骱 寤骱.
B. When working within 150C temperature; good stability.
Usually bearings:
The inner and outer rings are usually quenched; the resistance is poor; the impact resistance and oscillation function are poor; the thermal stability is not good.
4. Special bearings for public service and production process oscillation:
A. Strictly produced according to P6 precision specifications; special inner and outer diameter public service is very small.
B. The roll scales are different from each other ≤ 0. 002
C. The outer diameter of the cylindrical roller has a convexity; it prevents stress from collecting.
D. Tumbled surface super fine treatment; high finish.
Usually bearings:
A. Usually PO level precision public service (some P6 level specifications) production.
B. Roller grouping ≤ 0. 005.
C. Cylindrical roller without convexity practice.
D. Some raceways are only polished; the finish is low.
5. Special bearings for internal clearance oscillation:
The clearance is produced according to the demand of the oscillating machinery; the scale control is on a small scale; the consistency is good.
Usually bearings:
The play is usually produced according to the specification group or the C3 group; the clearance or the 蚴 段 螅 螅 螅 肷 (12) source.
6. Use special bearings for action oscillation:
Low noise; temperature rise. 榷ㄐ院茫皇褂 倜ぃ 倜ぃ 倜ぃ 缙谄 缙谄 窒 窒 @ drag 窒.
Usually bearings:
High noise; elevated temperature; poor stability; short service life; early fatigue appearance.


Recommend to friends comments close window

Bearing related knowledge
NTN/NSK single row angular touch bearing imported bearing grinding machine static pressure imported bearing how to repair the bearing common terms and definitions (5)
The symbols of SKF bearing products are usually symbolized in å•¥ orientation?
Characteristics and properties of self-aligning ball bearing products


This article links to http://
Please indicate the bearing network http://

Previous:What are the characteristics of SKF articulated bearing parts in the process of processing? The following are the common terms and definitions of bearings (9)

Aluminum Extrusion Profile Tube Punch Hole  

The extrusion Aluminum Tubing with punching hole can be shaped in almost any way desired. This provides unique construction and design possibilities, which is a good foundation for creating products that contribute to sustainable development.YF offers A6061,A6063 and other series aluminum alloy tubes with punching hole.

1.Material: A6063, A6061, A3003 and other series alu alloy        

2.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
3.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine  

OD

OD Tolerance

ID

Tolerance

Roundness

Straightness

Circular  

 run-out

φ16-20

±0.02

±0.02

0.01↓

0.015↓

0.05↓

φ20-30

±0.02

±0.02

0.01↓

0.015↓

0.05↓

φ30-50

±0.05

±0.05

0.02↓

0.020↓

0.08↓

φ50-80

±0.15

±0.10

0.05↓

0.025↓

0.10↓

4. STANDARD PACKING:Wooden case/carton

5. Trade Terms

1) Payment: 30% T/T in advance, 70% balance pay before delivery.  L/C at sight.
2) Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3) Trade Term can be chosen depending on your requirements.
4) FOB Port: Shanghai


Alumunim Tube Workshop

Extrusion Profile Tube Punch Hole

Extrusion Profile Tube Punch Hole,Punch Hole,Tube Aluminium Extrusions Profiles,Tube With Punched Holes

Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com

This entry was posted in on