Hot Dipped Galvanized Steel Grating, Stair Treads, Bar Grating

  • Model NO.: MWN-WC12
  • Application: Steel Structure Walkway, Foot Pedal, Drain Cover
  • Manufacturing Method: Machine Welding
  • Surface Treat: Galvanized
  • Trademark: MWN
  • Specification: SGS approved
  • HS Code: 73089000
  • Certification: ISO
  • Shape: Flat Shape
  • Material: Carbon Steel
  • Quality Standard: China Yb/T4001-1998
  • Transport Package: Pallets
  • Origin: Anping, China

Galvanized Steel Grating (Plain Steel Grating & Serrated Steel Grating)

1) Bearing Bar (Load Bar) (mm): 20 x 3 to 100 x 9;the specification of "I-section" is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4, 55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.
Hot Dipped Galvanized Steel Grating, Stair Treads, Bar Grating

2) Bearing Bar Pitch (center to center): 12.5 to 100 mm etc, also be according to client's requirement and 30, 40, 60mm are recommended, America standard is available

3) Cross Bar Pitch (center to center): from18.5 to 101.6mm etc, also be according to client's requirement and 50, 100mm are recommended, America standard is available.

4) Steel Grating  Material:Q235 Steel or stainless steel grating.

5) Steel Grating Surface Treatment: Untreated, Painting or Hot Dipped Galvanizing

6)Quality Standard:
Steel Grating Standard: China YB/T4001-1998
America ANSI/NAAMM (MBG531-88)
Britain BS4592-1987
Australia AS1657-1992
Steel Standard: China GB700-88 / ASTM (A36) / BS4306 (43A)
Hot Dip Galvanizing Standard: China GB/T13912-92 / ASTM (A123) / BS729

7) Application of Steel Grating: Floor;Catwalk;Mezzanines/decking;Stair tread;Fencing;Vault bin floor;Ramp;Dock/Warehouse;all kinds of trench cover;Window and machinery safe guards;Wash rack;Ventilation screen;Storage rack;Suspended ceiling;Drainage pit cover,etc
Hot Dipped Galvanized Steel Grating, Stair Treads, Bar Grating
Hot Dipped Galvanized Steel Grating, Stair Treads, Bar Grating

Air-conditioning foil is the manufacture of air-conditioning heat exchanger with a special material for the fin, the early use of air-conditioning foil is a prime foil. In order to improve the surface properties of plain foil, a corrosion resistant inorganic coating and a hydrophilic organic coating are applied before forming to form a hydrophilic foil. Hydrophilic foil accounted for 50% of the total amount of foil, the use of its ratio will be further increased.
Air conditioning foil thickness of 0.1mm ~ 0.15mm. With the development of technology, the air conditioner foil has the tendency of further thinning. Under extremely thin condition, the Aluminum Foil should have good formability, uniform microstructure and properties, less metallurgical defects and less anisotropy, meanwhile, the required strength High, good ductility, uniform thickness, good flatness.
Aluminum foil has a clean, sanitary and shiny appearance, it can be integrated with many other packaging materials packaging materials, and aluminum foil surface printing effect is better than other materials,in addition, aluminum foil has the following characteristics:

(1) Aluminum foil surface is clean, sanitary, no bacteria or micro-organisms can not grow on its surface.

(2) aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.

(3) aluminum foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.

(4) aluminum foil itself is not volatile, it itself and packaged food will never dry or shrink.



1100/1060/1235 Aluminum Foil

1100 Aluminum Foil,1060 Aluminum Foil,1235 Packaging Aluminum Foil

Luoyang Jinxuan Electronic Technology Co., Ltd. , http://www.jinxuanalu.com

This entry was posted in on