The use rate of toilets is relatively frequent. Sometimes, if you do not pay attention, it will cause a blockage, which will cause great distress to your life. It cannot be used normally, and bad smell will fill the entire bathroom. What should be done if the toilet is blocked? This is what many friends are eager to know, especially women. It does not matter, then the Xiaobian tells everyone how to clear the toilet , hoping to help everyone.
How to clear the toilet - dirty plug
1. The toilet is blocked. The most commonly used one is a leather tweezers. It is very convenient to use. Simply add water to the toilet, and then press the flaps against the toilet. Press it as soon as you hear a bang. If it doesn't work, add some water and follow the same instructions. Usually, you can solve it.
3. If the toilet block is due to hair, use a wire hook to reach the sewer mouth and stir it so that the dirt wraps around the wire, and then pull out the wire to pull the dirt out of the sewer.
4. If it is because of a slight blockage, such as a blockage caused by toilet paper, you can choose to use the toilet, which is a tool specially designed for pipe plugging and clearing. The front of the toilet is a flexible spring, according to the plug. The length of the spring is determined by the height of the toilet mouth. After tightening the screw, press the spring into the pipe until it is clear or the dirt is removed.
5. If it is because of oil, hair, or leafy food waste, you can use a plumbing agent, which is a kind of powdered dredge product that can be used for any dredge, and put the dredge agent into three volumes of about 50 each time. Grams, interval 1-3 minutes, after all the input to stay for three minutes into the hot water, and finally stay for 10 minutes, rinse with water, this operation, generally can play the role of toilet dredge.
6, if you can not find any tools, then there is a way to use tape, the kind of wide tape to seal the toilet (first put the next trace of water clean), to paste a little tight, do not leak. After confirming that the seal is good, press the flush switch. Because of the air, the middle part of the tape will bulge, and then press it down with your hands. It's almost passable.
How to clear the toilet - toilet tank pressure is too low
The pressure in the toilet tank is too small and can also cause a blockage in the toilet. At this time, find the valve that regulates the water level of the tank, check whether the flush pipe is blocked, and then adjust the force of the toilet tank according to the actual situation.
How to Clear the Toilet - Improper Installation of the Toilet
Sometimes due to various reasons, the toilet may not be installed firmly or may be too tightly sealed. This may also result in clogged toilets. In this case, it is best to ask the professional team to fully clear the toilet before reinstalling the toilet.
How to clear the toilet - Ventilation inside and outside the toilet is not smooth
If the ventilation of the toilet is not smooth enough, it will make the toilet easy to clog. When this happens, you can tear off the black plastic strip from the floor of the toilet and then leak a small mouth to vent the inside and outside of the toilet.
The above analysis of several common reasons and treatment of toilet blockage, how to clear the toilet ? We clear it? After the encounter in the toilet blockage problems in life, we do not have to rush to ask the professional team to clear, you can easily deal with Oh.
How to clear the toilet toilet
Ningbo RMI Plastic Co.,Ltd offer several models of PVC Ball Valve, include true union PVC Ball Valve, flanged PVC ball valve, gear type PVC ball valve, three way PVC ball valve, electric PVC ball valve, pneumatic PVC ball valve, PVC compact ball valve. designed as per standard DIN, ANSI, JIS, BS, CNS. pressure rate by PN10, PN16, 150LB. PVC ball valve is widely use in water supply, water treatment, swimming pool, finish farm, agriculture and irrigation etc.
Ningbo RMI Plastic Co.,Ltd offer PVC ball valve with specification:
Size:DN15~DN300 (1/2 inch ~ 12 inch)
Connection: Flange DIN PN10, ANSI CL150, JIS10K; socket DIN, ANSI, JIS, CNS, BS; Thread BSPT, NPT.
Body Material:PVC-U
Seal material:EPDM
Seat Material:PTFE; PP
Design pressure:1.0Mpa(PN10 bar)
PVC Ball Valve
PVC Ball Valve,PVC Ball Valve Flange,UPVC Ball Valve,PVC Union Ball Valve
Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com