How to safely handle pesticide waste

Pesticide waste is often found in the storage, transportation, and use of pesticides. If these wastes are not strengthened in control and management, they will inevitably cause potential harm to human health and environmental pollution. Therefore, effective treatment of pesticide waste must be carried out in an effective manner.
First, pesticides that have been identified, rejected, and eliminated by the state's technical department should be destroyed. Highly toxic pesticides are generally chemically treated and then buried in trenches with impervious structures, requiring access to residential areas and water sources, and the establishment of “toxic” signs. Low-toxic, poisoned pesticides should be buried in deep pits away from residential areas and water sources. All pesticides that are burned and destroyed should be disposed of in a special furnace.
Secondly, pesticides that are spilled at non-application sites should be disposed of in a timely manner. In order to avoid spillage of pesticides during work on pesticides, workers should wear protective clothing (such as gloves, boots and eye protection). If there is a spill in the operation, the contaminated area is required to be responsible for preventing children or animals from approaching or contacting. For solid pesticides such as powders and granules, cover them with dry sand or soil and clean them in a safe place or application area; For liquid pesticides, use sawdust, dry soil or granular adsorbate for cleaning; if it is highly toxic and large, it should be treated according to high-toxic pesticide treatment; be careful not to allow the washed water to be poured into sewers, ditches or ponds.
In addition, pesticide waste packaging materials are strictly prohibited for use as they are used, and should not be disposed of properly. It can be recycled by the sales department or the production plant in good condition. Damaged packaging of highly toxic pesticides should be treated in accordance with the treatment of highly toxic pesticides. Specifically, metal cans and barrels should be cleaned, blasted, and then buried. The top of the container in the pit is 50 cm from the ground; the glass container is broken and buried; the packaging board of the pesticide is to be burned; the herbicide The packaging board is to be buried; the plastic container is to be washed, penetrated and incinerated. Do not stand in the smoke generated by the flame when burning, and let the children leave. In addition, if the containers cannot be handled immediately, they should be washed in a safe place. In short, special care should be taken not to pack food or beverages in containers filled with pesticides, as there are many examples of poisoning.
Finally, it should be pointed out that the treatment methods and disposal sites for a large number of discarded pesticides should be approved by the labor and environmental protection departments, and reported to the higher authorities for the record.
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

Wireless Water Meters

Jingcheng wireless remote transmission water meter and the AMR (automatic meter reading) system were designed for the Water Supply Department, Which is new accounting management system. The system consists of 4 components: water meter, zone collector, GPRS concentrator and master point (management center). It adopts Zig-Bee with GPRS communication way to achieve a automatic and intelligent charge management.

The new Jingcheng IC/RF card prepaid water supply system is perfectly adapted to the needs of the utility industry in terms of efficient readout processes and highest data quality.
The measuring devices send a data protocol at specified intervals. For data security reasons the data telegrams are AES encrypted according to the up to date technology. The Radio receiver will process the data telegrams to a handheld or tablet PC with the Jingcheng readout software.
The consumption data and additional information relating to the meters are stored on the mobile device. They are transmitted to the PC in the office to use them for billing or energy monitoring purposes.

FEATURES:

1.Combining with meter-reading system to enable the automatic meter reading.

2.Compatible with several third-party software systems

3.Frequency(RF Card): Standard for the country.

4.Power: Battery inside.

5.Low-consumption design. only consume when meter need read.

6.Valve control remote switch.

Wireless Water Meter,Wireless Flow Water Meter,Brass Wet Type Water Meter,Wet Type Vane Wheel Water Meter

Ningbo Jingcheng Technology Co., Ltd. , https://www.jingchengmeter.com

This entry was posted in on