At the moment, there are two types of lofts: one with a loft on the top floor and one with a pure loft. Most of them are top floors with lofts. Because the attic itself is mostly sloped and has a triangular shape, there is a saying in the design community that “wrong is wrongâ€, that is, the original architectural style is retained as much as possible, and the height and shape of the attic are used to make full use of the design.
General principles of loft decoration
First, relative to the flat-roofed room, the decoration of the inclined roof needs to be more intensive, especially in the choice of furniture, on the side of the inclined roof, in order to make full use of the space under the inclined roof, you can put the side of the furniture according to your own The need to make a sloping look that matches the sloping roof is not a little fun.
Second, the space under the windows can not be wasted because the distance from the bottom of the window to the ground is generally short, and this space can be used for storage. A moving pulley cabinet and some low furniture can be installed under the window. Not only practical, but also can cover the heating under the window.
Third, the top of the inner wall of the window opening is perpendicular to the floor of the building, so that the amount of light collected by the inclined window can be increased. The 45-degree oblique window is 0.9-1.1 meters below the ground and 1.8-2.2 meters above the ground. Less than 45 degrees, it is recommended to use a longer 1420cm window, can make up for the lack of angle.
Fourth, if the original window area of ​​the attic is small, it may result in poor light and ventilation effects. You may consider refitting your windows or adding inclined roof windows, but you must go through the approval of your property and intensify or modify them under the guidance of the relevant professional.
Fifth, radiators and other heat sources should be placed under the window, so that it can ensure that the hot air flow rises to the surface of the glass, and the temperature of the inner surface of the window is increased, thereby reducing the amount of condensation of water vapor.
6. Try not to damage the original structure of the attic. Many consumers choose a house with a loft that is in love with its unique structure, so designers do not try to change the structure when designing. For example, when making a ceiling, it is not necessary to use a whole piece of gypsum board ceiling. The gypsum board can be drilled or broken into lines to handle it, or a wooden beam can be made, which will not destroy the original structure and increase the change.
7. Make reasonable use of attic space. In particular, some sloped corners can be spotted with spotlights, plants, and pebbles. In the case of adequate storage space, this treatment can increase the beauty more than making a cabinet.
Eight, pay attention to the setting of lights. The general loft is characterized by insufficient light, large stacking heights, and irregular spaces. Therefore, special attention should be paid to the matching and setting of lights when designing. It is necessary to ensure that light in every place cannot use light.
Space Effect Picture Villa Design Window Space Furniture Decoration Design Glass Decoration Living Room Decoration Style Cloth Sofa Cabinet Glass Cabinet Glass Furniture Computer Sofa Chair Glass Table High-end Curtain Study Furniture Small Study Study Study Bedroom Bedroom Lamp
Isolation Bridge Bearing,Earthquake Absorbing Damper Bearing,High Damping Rubber Bearing
Rubber Seal Strip Co., Ltd. , http://www.nsrubberseal.com