Pneumatic glue gun is a tool for gluing (or squeezing) glue, which will be used where glue is needed. It is generally used in construction decoration, electronic appliances, automobiles and auto parts, ships and containers and other industries. According to the type of packaging of the glue, it can be divided into single-group or two-component products, which can be used in tube or bulk packaging. Let's take a look at this tool intuitively through some pictures of pneumatic glue guns!
Â
Pneumatic glue gun picture
Â
Pneumatic glue gun principle
Â
Pneumatic glue guns rely on compressed air as the power to push the bottom of the glue. Compared with manual glue guns, it can reduce the labor intensity of the operator, improve work efficiency and improve the quality of the glue. There is no need to connect the power supply. Generally, the factory production line is equipped with a compressed air source (from the air compressor station or air compressor of the factory through the air pipe).
Requirements for air pressure: The design pressure of common pneumatic glue guns on the market is 10 bar (approximately 10 kgf / cm2, commonly known as 10 kg). The pressure of the general factory air source is 6-8 kg. 8 kg can work normally. If the air pressure of the air source is too low, it may affect the normal operation of the pneumatic glue gun (such as slow glue application, or even no glue, etc.). The air consumption of a single pneumatic glue gun is not large. If there is no compressed air source, it can be equipped with a small air compressor (commonly known as an air pump) to work.
Â
Maintenance of pneumatic glue gun
Â
　　 No glue from glue gun
1) If the working pressure of the air source is too low, the pressure valve should be adjusted appropriately to increase the working pressure.
2) The glue gun is not cleaned, the glue solidifies the channel, at this time, the channel must be cleared.
3) The viscosity of the glue is not suitable. If the viscosity is too large, the resistance will increase, and the glue will not be continuous or the glue will not come out. Therefore, choose the glue that meets the requirements.
　　 Glue gun leak
1. Pneumatic glue gun
1) Air leakage at the air inlet: the air pump and the air inlet of the glue gun are not sufficiently sealed. You can choose to change the joint or connect the air pipe to the air inlet of the glue gun and fix it with iron wire.
2) Air leakage from the gun body: the screw can be removed, reinstalled, and the screw tightened. Or seal with glass glue, serious air leakage, please contact the supplier to replace the gun body.
3) Air leakage at the front of the barrel: the glue is too long, which prevents the front cover from being tightened. Or the front cover itself is screwed in place.
4) Air leakage at the rear of the gun: The sealing ring is damaged, or the rear silencer is damaged. Please contact the supplier for replacement.
2. Electric glue gun
1) Air leakage from the gun body: the screw can be removed, reinstalled, and the screw tightened. Or seal with glass glue, serious air leakage, please contact the supplier to replace the gun body.
2) Air leakage at the front of the barrel: the glue is too long, which prevents the front cover from being tightened. Or the front cover itself is screwed in place.
3) Air leakage at the rear of the gun: The sealing ring is damaged, or the rear silencer is damaged. Please contact the supplier for replacement.
The above is the picture of the pneumatic glue gun and the related content of the maintenance of the pneumatic glue gun. The pneumatic glue gun is also a very common tool in our lives. Generally, we can see it when decorating the house. This tool also plays a big role in different industries.
Mechanical graded cement injection device is a special tool for graded cementing,which is
straight wells or inclined wells less than 30°.Its structure is an internal closure structure
circulation hole through a cast gravity plug.When closing,drop the closure from the wellhe
closure sleeve down to close the circulation hole.
Mechanical Stage Cementer
Mechanical Stage Cementer,Cementing Special Tools,Mineral Cementing Tools,API Mechanical
Puyang Junhong Rubber Co., Ltd. , https://www.pyjhxs.com