Pre-installation preparation 1. Ground requirements: Before the installation of bamboo flooring, uneven ground shall be smoothed with cement slurry and allowed to dry; 2. Bamboo Flooring: Since the installation effect of bamboo flooring is affected by humidity, temperature, etc. at the construction site, it is advisable to unpack the bamboo flooring to the installation site one to two weeks in advance, after which the installation time is determined. The humidity before installation is the same as that on the construction site, which can effectively control the expansion coefficient after installation of bamboo flooring; Â Â Â
3. If you choose a fixed installation method, first install the keel.
Bamboo Floor Installation - Stationary Installation  1. Do a good ground treatment to ensure that the ground is flat, clean, and dry; 2. Because the fixed installation requires the use of a dragon skeleton, after the dragon skeleton is fixed on the ground, a layer of oil blanket or moisture-proof paper should be laid on the keel. 3. Use 1cm plywood to lay on the wooden strip and fix it. Then pave the bamboo flooring on the plywood. Use a few nails at the male and female place (the interface of the wooden floor). If it is not a whole piece of bamboo flooring, use a little clear oil at the cutting area to avoid rehydration. Leave a 1-1.5cm expansion joint around the floor for the base line. 
Bamboo Floor Installation - Suspended Installation Taking into account the stretching factor of the floor, the suspension installation method is based on the use of four sides of the bamboo floor to rely on together, without bonding with the ground. Also need to leave some expansion joints around the wall for installing the foot line. In general, the suspension installation method is more in line with the physical characteristics of bamboo flooring, and it is also more convenient. It is now a method of installing bamboo flooring more.
Bamboo flooring installation precautions  1. If you choose a fixed installation, then the paving keel must be dry, after the positioning of the dragon skeleton, and then use cement nails to fix the keel; 2. Installation direction of bamboo flooring has a particular: generally installed in the window with the outside The light angle is installed in parallel. If it is installed in a small space such as a corridor, the bamboo flooring should be parallel to the longer wall. This can reduce the number of saws and save the materials. 3. The color and texture of the bamboo flooring are not exactly the same. The best arrangement before installation is to arrange the color, texture and length appropriately so that the effect after installation will be more natural. 4. After the bamboo flooring is installed, the waxing maintenance can be performed for the first time. It is important to note that the wax is hit on the seams not on the floor. The above is an introduction to the installation of bamboo flooring, hoping to help everyone. Bamboo flooring
Corrosion-Resistance Alloy,mainly refers to ordinary stainless steel resists atmosphere and sea water corrosion such as 300 series stainless steel including 304,316L, 317L etc.; comparatively strong corrosion resistance material including austenitic stainless steel 904L, 254SMOand Dual phase steel 2205,2507 etc.; Corrosion Resistant Alloy containing Cu 20 alloy; In comparison to non-metal corrosion resistant materials, corrosion-Resistance Alloy main refers to iron alloy (resistance to corrosion); nickel alloy (Ni-Cr alloy, Ni-Cr-Mo alloy, Ni-Cu alloy and other active metal.
Corrosion-Resistance Alloy
Corrosion-Resistance Alloy,Corrosion-Resistant Alloy Tube,Corrosion-Resistant Alloy Welding Wire,Corrosion-Resistant Nickel-Chromium Alloy
Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com