Generally speaking, the standard procedures for floor tile paving include cleaning and finishing the ground floor → cement mortar leveling → calibration height, elastic line → installation standard block → material selection → infiltration → paving → irrigation → cleaning → maintenance work, each process There are strict requirements in the company. Only by strictly doing it can guarantee the quality of the whole decoration.
However, many owners may know some ceramic tile brands, and they will also buy good quality ceramic tile products, but they are not very clear about the tile layout. After editing this kind of information, Xiaobian summarized three major measures. To ensure the quality of the tile decoration.
Measure 1: Determine the tile size and color according to the decoration style and space size
Different decoration styles and different sizes of space need to be laid with corresponding tiles. Rooms with smaller space are not suitable for tiles with too dark colors, and light colors are better, such as white and gray. Blue and green will make people feel the comfort of the pastoral style; beige is often the main color of the living room floor, making people feel magnificent; stone floor tiles will look simple and natural.
According to the general apartment type, the bathroom, kitchen and balcony within 10 square meters, the size of the floor tile is generally about 300×300mm is the best; if the living room or bedroom is about 20 square meters, you should choose 500mm×500mm or 600× 600mm. Large living room of 30 square meters or more, 600×600 or 800×800mm can be used; if it is above 40 level, 800×800mm or 1000×1000mm tiles can be considered, such as large-scale polished tiles of Golden Rudder Ceramics. I crystal controlled microcrystalline stone and the like.
As for the wall brick size, it is completely according to personal hobbies, as small as mosaic, as large as 240 × 660mm, 300 × 300mm wall tiles, such as the general decoration of better quality bathroom and kitchen, like to use the golden rudder ceramic climbing wall Tiger series ceramic tiles, specifications are 300 × 300mm, 300 × 450mm, 400 × 800mm and so on.
Measure 2: Prepare the work before the tile is laid
Before the tile is laid, there is a series of preparations to do. This is a key part of ensuring the quality of the decoration. These preparations mainly include: cleaning the back of the pre-selected tile and immersing it for more than 2 hours. After drying or drying, the paving can be carried out; the leveling of the ground and the base of the wall ensures the smoothness of the surface; the base layer is cleaned and the base layer is watered, and the paving can be carried out when there is no obvious water on the ground or the wall.
Of course, there are also out of the box to pick the tiles, remove the inappropriate, and prepare good quality cement mortar, these details will affect the quality of the paving.
Measure 3: Some details must be done during the tile paving process
When laying the tile, it is necessary to scrape the excess adhesive material in the tile joint in time, and wipe the stain on the brick with a damp cotton cloth. Do not wait until the bonding material is dry and then wipe it clean, which may be difficult to clean. clean.
During the paving process, other decoration work carried out at the same time should not be dirty on the ground. It is not allowed to step on the road. It is forbidden to walk on the floor tiles for at least two days; the joint treatment of the tiles is also strictly required.
Baggage X Ray Machine,Cargo Security Scanner,Air Cargo Scanner,Penetration Luggage Scanner
Shenzhen MCD Electronics Co., Ltd. , https://www.gdmcd.com