>>> Secret: installation of aluminum buckle ceiling
There are many specifications for the aluminum buckle plate, including the panel width, thickness, hemming height and so on. The selection should be based on the characteristics of the home bathroom. Aluminum buckle plate is divided into two kinds of surface punching and plane. The surface punching can breathe sound and sound, and the interior of the buckle plate is covered with a layer of film cushion, and the moisture can be absorbed by the film through the punching hole, so it is most suitable for the kitchen with more moisture. The 600mm×600mm micro-hole square plate, F297H30 strip plate and M185H20 aluminum buckle plate are widely used in the market.
The quality of aluminum gussets is not entirely thin and thick. The key lies in the texture of aluminum. The aluminum gussets used in general engineering are 0.8 millimeters or even thicker. Why? Because some engineering gussets are very long, in order to prevent deformation, so use a little thicker, a little harder, on the contrary, home use aluminum gussets, rarely more than 4 meters, and there is no weight on the aluminum buckle ceiling Things, so, home improvement aluminum buckle, so to speak, 0.6 mm is enough. So, why did you come to the building material city, many salesmen said to you 0.8 mm, and some friends said that someone introduced him to 0.88 mm; that's because their boards are not working, so they can only take the thickness To come to Mongolia - really tireless.
Clearly telling everyone that 0.6 mm is enough. Take the example of an imported brand aluminum buckle plate with a large reputation on the market, its price is more than 300 yuan per square meter, but what is its thickness? 0.5 mm, not as good as 0.6 mm! Why, the board is not good or bad, but the substrate. In fact, if the aluminum gusset you are consulting is brand name, most of them are 0.6mm in terms of mid-range.
Regarding why some brands are not good at 0.8mm, there are some miscellaneous brands that use aluminum for cans. Because of the quality of aluminum itself, they want to make aluminum buckles very thin but not possible. Because the aluminum is not good, the board can't pull thin evenly, so they can only do it in thick.
Therefore, to identify the aluminum buckle plate, in addition to paying attention to the surface finish, it is also necessary to observe whether the thickness of the plate is uniform or not.
Ceiling to buy home decoration kitchen ceiling bathroom ceiling
Metals Cnc Milling,Cnc Truning Service,Plastics Cnc Truning
Machining Parts,Plastic Injection Mould Co., Ltd. , http://www.chmachiningparts.com