In many people's view, the decoration of second-hand houses is not troublesome. It is only in keeping with the original structure of old houses that they need to be replaced again. It is not known that the majority of second-hand houses are old houses, even if the framework is still It is strong, but many parts of the room need to be replaced. So, how is the second-hand housing renovated? The following Xiao Bian brings us second-hand housing decoration strategies for everyone , and hopes to help everyone.
First, how to decorate second-hand housing
1
Do a full inspection of the houseAs the quality of second-hand housing varies widely, it usually passes through the renovation of the original owner. Sometimes the decor will cover many shortcomings. Therefore, when the owner buys a house, it is best to observe every detail carefully from the facade to the corridor, from the wall, the ground to the doors and windows, and the pipeline. Understand the overall structure of the house, whether the structure of the house has damaged the decoration, there is no private use, remodeling. In this regard, it is necessary to communicate with the owner more about the internal structure of the house, including the direction of the pipeline, the location of the load-bearing wall, and so on, so that it can be easily renovated in the future.
2
Develop a detailed renovation planSecond-hand house decoration is a systematic project, so a detailed renovation plan is required before the renovation. No increase in the decoration process, or take a step to think of a step, without co-ordination arrangements, the more money can only be spent more. The second-hand house is different from the new house. The decoration must first be dismantled, but care must be taken not to knock out all the old ones, and some of the dismantled materials can be reused, such as floors and tiles.
3
Pay attention to transformation safetyDesigning second-hand housing renovation, the most critical thing is to avoid smashing the bearing wall. Due to the small size of the old apartment layout and the compactness of the space, the decoration design has certain limitations. Try to use the home accessories in the later period to achieve the effect of space expansion; In the renovation process, the concept of energy saving is reflected. For example, the transformation of the waterway, the lack of rationality in the distribution of the pipelines in the old building, and the limitations on the location of the water pipes in the kitchens and bathrooms. Once the changes, it is necessary to replace most of the pipes, and the space needs to be divided reasonably. At this time, we must choose energy-saving products, such as water-saving faucets and water-saving sanitary products.
Second, second-hand housing renovation Raiders
In the second-hand housing renovation must pay attention to details of the problem, the increase, give up and give up in the heart must have a few. Look at the points of second-hand housing renovation Raiders.
1
Water, circuit transformation processingWater and circuit transformation are the most complex transformations of old houses. The waterway reconstruction should be done in a rational, tightly connected manner, with no leakage, no illegal removal. As for the transformation of the circuit, if the old house is made of aluminum wire, it must be demolished. Modern home appliances are many. According to national standards, 2.5 mm copper wire must be used in the decoration, and the circuit for installing high-power electrical appliances such as air conditioners should be separate. Take a 4mm2 line all the way. PVC insulated pipe must be used when embedding in the wall.
2
Closed water test for toiletsBefore decorating a second-hand house, first of all, the decoration worker should be asked to perform a water-removal test for the restroom, and check how the previous water-repellent treatment is done. The method is: block the floor drain, put 5CM of water in the toilet, observe for 24 hours, and then go to the neighbors downstairs to check, if there is no leakage, prove that the waterproof treatment is done well; if it leaks, we must ask the property to re-waterproof After finishing the waterproof treatment, wait until the ground is completely dry and then paste the tiles, otherwise the ground will crack.
3
Replace aluminum alloy or steel doors and windowsWooden doors and windows, if there is no deformation or cracking, indicating that the material is very good, can be decorated in the decoration, affixed to the veneer plate, and then painted with paint, continue to use; if the wooden doors and windows have been deformed, then it will be demolished, re-production. Iron doors and windows, if the surface of the paint has been peeled off or the main body cracking, it is recommended that everyone remove, replaced by aluminum or plastic material. Because the doors and windows of these two materials can play a role in sealing, sound insulation and heat insulation.
4
Stucco wall, bottoming is the keyThe walls of the old house will be cracked and peeled. Therefore, when decorating the wall, be sure to pay attention to the basic treatment. Generally, a good decoration company will apply the interface agent and interface agent after leveling the wall. With the role of moisture, but also can play a role in the protection of latex paint, followed by putty, putty paste to use waterproof putty, putty scraping generally have to be three times, and finally brush latex paint. If the wall is to be colored, paint it accordingly.
5
Add essential switches and socketsAt present, in the family life, the number of electrical appliances is increasing, and the lighting and lighting equipment are becoming more and more colorful, so there are many places where switches and sockets need to be placed. Well, before the renovation, we must do a good job of wiring in advance, which places need to be placed in the future, to do a good job in advance planning, and the old house reserved switches and sockets are generally not enough. Normally, a room needs to have at least 3 sockets installed. The number of sockets in a two-bedroom residential building is not less than 15 and the number of switches is not less than 8. The switch height of the same room should be the same, the general switch is 1.4 meters from the ground, and the outlet is 0.3 meters from the ground. The switch between the suspension and the living room should be set in a place easily accessible to the owner.
6
Do a good job of disinfection to maintain indoor air circulationDuring the entire process of renovation, especially after applying glue and brushing paint, it is necessary to open the window diligently to keep the air in the room. If there is no window in the bathroom, open the exhaust fan. The decoration process should be thoroughly disinfected on a regular basis, and can be sprayed with 3% lyosol, 1%-3% bleach water, or 3% peroxy acetic acid solution. Close doors and windows for 1 hour after spraying.
In addition, it is recommended that you do not immediately stay after the renovation, if the conditions permit, it is best to open the windows every day, to maintain indoor ventilation, can make formaldehyde and other toxic gases quickly evaporate. It is advisable to fully ventilate the room for at least 1 month before check-in.
The above about second-hand housing how to decorate and second-hand housing decoration Raiders is a simple introduction to here, and I hope to help you! For more information, please visit this website. Stay tuned.
Second-hand housing second-hand housing decoration second-hand housing renovation Raiders
Ningbo Actmix is committed to providing the best quality chemical solutions for automotive rubber sealing parts manufacturers.
Ningbo Actmix specialises in production the Actmix®Pre-dispersed rubber accelerators. We select the high-quality materials, combine with special formulation, adopt automatic and safety equipments to produce Actmix®Pre-dispersed rubber accelerators.
Granules size: diameter about 6mm, length 8mm.
1. Use mesh filtered the Actmix®Pre-dispersed Rubber Accelerator.
3. Dust free and lower water absorption.
4. Performance with: high activity, high dispersion and mixing high efficiency.
5. Easy kneading at lower temperature, especially for open mill mixing.
Actmix®Polymer-bound Pre-dispersed Rubber Accelerators, can meet RoHS, PAHs, Phthalates 6P, SVHC 181 (Substances of Very High Concern) requirements of regulation (EC) No.1907/2006 concerning the REACH.
Rubber Accelerator Masterbatch
Rubber Accelerator Masterbatch,Pre-dispersed Rubber Accelerator,Moderate Curing Speed Accelerator,Synthetic Rubber Accelerator
Ningbo Actmix Rubber Chemicals Co., Ltd. , http://www.actmixchemicals.com