Second-hand housing and hydropower reform costs second-hand housing renovation to save money misunderstanding

How much is the cost of second-hand housing hydropower reform ? Generally speaking, the cost of decorating the hydropower can be integrated according to the cost of the circuit, waterway and construction technology during our renovation. During the hydropower reform, the owner needs to carry out the construction of the project, and the cost of purchasing materials for the hydropower renovation and decoration process. The cost of the construction process needs to be properly tested and understood so that the second-hand housing renovation and hydropower reform project can be better implemented. Therefore, it is necessary to remind everyone that it is also a reminder to all owners of second-hand housing, hydropower reform, "the most important" must pay attention to it! The following gives you specific information about the cost of second-hand housing hydropower reform is related to it!

Second-hand housing hydropower reform costs

1. General decoration companies sometimes have the same person for hydropower; some are done separately.

Plumbers, as a family, were previously all-inclusive, what was in the kitchen, what was in the bathroom, what was the balcony, and so on.

For example, 90 square meters, kitchen sink, natural gas water heater; bathroom shower, toilet, washbasin, mop pool; balcony sink, washing machine.

2, open slot, take the leading all get good, last year's price is 450 yuan, duration 2-3 days.

Now, it is said that according to meters, this year's market is not clear, it is the price increase!

1, electricians, formerly all-inclusive, from the beginning of the open slot to the end of the lamp, 90 square, the amount of work is relatively large, such as a lot of switch access, a lot of chandeliers, according to 1500-2000 calculations.

Later, according to the square calculation, and according to the construction area, what we learned last year was 3.5--4 yuan per square.

It is said that now, according to meters, the wire is calculated according to meters, 90 square meters, you are normally connected to double, increase some sockets, wires have to spend 500-600 meters (all). There is also a weak line CCTV line.

2, the general 90 square, 2 rooms and 2 halls of the kind, the use of pipelines about 60 meters, about 600 meters of wire, 3-4 days early slot, wiring, late 2-3 wiring, according to lights. According to last year's market, water money should not exceed 3,000 yuan.

Note: This price is for reference only! Due to geographical differences, of course, the price will be different. If you want to know more about the relevant price details, please use the local dealers to provide!

Second-hand housing and hydropower renovation key places

Hydroelectric reform to ensure safety

In second-hand housing renovation, hydropower reform is both the most basic part and the most critical part. From the material point of view, most of the house waterway processes that were renovated in the early years used galvanized pipes, aluminum-plastic pipes, and other materials. Leakage occurred from time to time. Now, with the replacement of materials, these pipes have begun to be slowly abandoned. At present, most decoration companies use plastic steel pipes. In the second-hand housing renovation, just take this opportunity to give the aging water pipe "shotgun".

  

Transform home structure

For the owners who want to change the structure of the house through renovation, the wall reconstruction is the most effective means. However, people in the industry suggest that the wall structure should be lessened under normal circumstances. If the wall is really unsatisfactory in terms of structure, some walls need to be dismantled to reintegrate the space. At this time, we must pay attention to the fact that the load-bearing wall cannot be dismantled and the structural force of the house is changed. It is also not allowed to make holes or open the door on the load-bearing wall. This situation will bring extremely serious hidden dangers. If the original wall is very reasonable, then in the second-hand house decoration, you can use wall paint, wallpaper or wall covering to give the wall a brand new face, and this will also save a lot of expenses.

It takes money to do it

Second-hand housing renovation involves more problems than new homes, and the cost is not necessarily less than that of new houses. In particular, second-hand housing renovation requires an additional demolition fee. Therefore, the renovation investment varies from person to person, and it can only be done in a satisfactory manner. Need to be determined. If the second-hand house decoration is for young people, it may be possible to re-purchase the property immediately. It is suggested that the existing decoration can be used more frequently, and the living room and the main bedroom will be renovated. Generally, the use of moving furniture is considered.

Second-hand housing and hydropower reform matters needing attention

1. When performing the above operations, it mainly involves slotting, which is generally the work of the mason. However, if there is a cutting machine, a plumber can do it easily. When the trough is leveled, mason is involved. Therefore, from the operation process, it is a cross-cutting work of three types of work. If you are decorating your own house instead of a decoration company, you should pay attention to the coordination of their cross-operations and mutual cooperation.

2, the wire should be regular products, line tube, cassette must be fire-retardant. Because it is a hidden project, it must not be sloppy.

3, waterways, water pipes should also be formal and reliable products. No matter what kind of takeover method, it must be reliable. The pressure test must be conducted strictly according to the standard.

4, weak video lines, must be thicker double shielded core. Telephone lines and network cables cannot be sloppy either.

  

Second-hand housing renovation to save money misunderstanding

Misunderstanding 1: The old house decoration is cheaper than the new house

Many owners believe that the decoration of old houses does not need to be too complex. Simply installing them will definitely make them cheaper than new homes. In fact, the cost of an old house for basic decoration is usually about 15% higher than a new house with the same area, because the old house needs to be removed and remodeled more than the new house.

The original basic decoration of the old room was mostly old and outdated, and it needed to be dismantled and remade. For example, the original window is an iron window, and the air leakage is serious. It needs to be replaced with a plastic window or a broken aluminum window. The original wall base material is poor, and the original basement layer needs to be removed, leveled, and scraped again to resist cement to brush the latex paint.

Myth 2: Partial renovation is simpler than full-fitting

Some owners just want to change the cabinets or change the color of the walls, so they think it is definitely much simpler than the overall renovation. However, in fact, partial refurbishment is a more difficult task than overall renovation. First of all, it must be difficult to build in a space that already has many "obstacles." Second, other non-reconstructed areas and items in the home must be protected.

If the interior of the bathroom is changed, the original waterproof layer may be destroyed and need to be redone. The ground connection with other spaces also needs to be reconnected. Therefore, "local" renovation costs are also relatively high.

Myth 3: No need for hydropower reform

One owner stated that he spent a total of more than 20,000 yuan on the basic decoration of his entire old house, of which the hydropower reform was 6,000 yuan. "I'm definitely black here." The owner was very angry with the bill.

In fact, in many buildings built in the 1970s and 1980s, the circuit design can only meet the needs of electricity at that time. With the increasing number of household appliances, tripping or even fire can easily occur without replacement.

Editor's summary: After construction, an accurate map of the direction of the waterway reconstruction must be drawn and properly kept, especially the house where the underground pipe is laid, so as to solve the problem of leakage of second-hand housing waterways in the future. For more information, please continue to pay attention to our website, follow-up will show more exciting content.

Second-hand housing decoration costs simple living room effect beautiful simple decoration living room bedroom simple decoration second-hand housing decoration budget second-hand housing hydropower reform costs

The ISO Vacuum Flanges & Components are manufactured from high quality stainless steel. Kaysen Steel manufacture a comprehensive range of ISO Vaccum Flanges & Components, including ISO Vaccum Flanges, ISO Vaccum Components, ISO Flanges , nipples, elbows, tees, and crosses, clamps, o-ring in all standard vacuum flange systems. KAYSEN ISO Vacuum Flanges & Components form a modular system for piping from ISO63, ISO80, ISO100, ISO160, ISO200, ISO250, ISO320, ISO400, ISO500 in SS304, SS316 material, Aluminium, etc. ISO Fittings are ideal for high vacuum environments. Welcome to buy ISO Vaccum Flanges, ISO Vaccum Components, ISO Flanges from us in wholesale price, if you have any questions or requests, pls feel free to contact us!

ISO Vaccum Flanges & Components Specification:
â–ª Standard: KF, ISO ,CF
â–ª Material: Stainless Steel 304 (1.4301), Stainless Steel 316L(1.4404), Aluminum EN AW-6082/3.2315, Brass, etc
â–ª Sealing Material: rubber/ elastomeric o-ring mounted in a centering ring
â–ª Size Range: ISO63, ISO80, ISO100, ISO160, ISO200, ISO250, ISO320, ISO400, ISO500
▪ Temp.:between ~0° C and 120-180° C
â–ª Pressure: from atmosphere to ~10-8 Torr or mbar.

Quality & Inspection:
â–ª PMI test to verify material grade
â–ª Dimension controlling during fabricating and finished
â–ª Visual and surface 100% examination before shipment
â–ª Packed in carton box firstly, then in wooden case

ISO Vacuum Flanges & Components

ISO Vacuum Components,ISO Vacuum Flanges,ISO Flanges

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com

This entry was posted in on