It is the determination of Zheng Zheng to participate in the exhibition team as much as possible for each user to see the finishing quality that Zheng Drill has consistently adhered to.
Exhibit Display As the most important point of focus on explaining products to users, we make full use of the unique advantages of each representative exhibit, aiming to best meet the needs and resonance of users!
In the soft light, some small non-standard blades can focus on the user's eyes, because we have added a design of the chip breaking groove in this blade, which can completely solve the row existing in the process. The sticking knife phenomenon caused by poor chipping makes the quality of the ultra-hard tool efficient processing more perfect.
In addition to exhibiting a range of tooling products for automotive engines and transmissions, the exhibition also includes specialized tooling products for the aerospace industry and medical devices. This series of tools is commonly used in finishing and semi-finishing. The processing parameters and precision have reached the international level.
Different from the past, the blade is our main main exhibit, but it is not the core of our technology. At the exhibition, some tool holder series products were also exhibited. These exquisite tool holder products revealed a message to more users: Zheng Drill has mastered the technical level of developing the tool holder series products and then independently developed new tool holders. ability.
The exhibition attracted many new and old customers to watch and visit. They highly praised the design and product technology and quality of our booth, and they are full of expectation for our future product innovation!
In plastic field, many suppliers know the material, but they know little about the machining.
Some other suppliers know about the machining, but they don't know the material properties. In the two situations, problems happen frequently.
If you have same problem, come to CHUNHUAN GROUP, we solve the problem for you perfectly. Experienced both in material and machining, customers are very glad to cooperate with us.
The machining process include below
1.Turning: For parts which have high surface requirement, wide-head cutters are better. When processing thin walled and soft material, cutters like knife are recommended.
2. Milling: When milling the surface, end-milling is more cost-effective than circular milling. For circular and forming cutter, it should have less than two cutter edges. In this case, the tolerance caused due to the edge vibration can be lowered to the minimum.
3. Sawing: Thin saws are usually used to saw thick parts to avoid the heating caused by friction. It would be better to use sharp and big sawblade.
4. Drilling: When drilling the solid materials, make sure to use sharp drill, otherwise the increasing pressure during drilling will cause material cracks.
Characteristics
-Work well between -260°C and 260°C
-Superior chemical resistance
-Very low coefficient of friction
-Longest aging life in plastics
-Good dielectric properties
-Non-toxic
-Non-stick
PTFE Parts,White PTFE Parts,Plastic PTFE Parts,Industrial PTFE Parts
ZHENJIANG CHUNHUAN SEALING MATERIALS CO.,LTD(GROUP) , http://www.chsealing.com