The high-bar lights that we usually say are actually very different depending on the application. The classification and name of the high-bar lights are different according to different occasions. For example, the dock used, called the pier high pole lights, used in the square, called the square high pole lights, named after the port high pole lights, airport high pole lights, explosion-proof high pole lights, stainless steel high pole lights and so on. It is generally considered that a lamp pole of more than 15 meters is called a high pole light, or a middle pole light, ranging from 15 to 40 meters. The five types of specifications are 15 meters, 18 meters, 20 meters, 25 meters, and 30 meters. common. Others are generally required by the customer to design a specific height, which is what we often say is the high pole light divided by height.
Common high pole lights are configured as follows: The height of the pole is about 30 meters, which is usually lifted. The general material is made of Baosteel Q235, and the standard thickness of the shaft is 6.8.8.10.mm hot-dip galvanized spray. The steel plate is usually formed into a prism shape by molding, and is generally a vertical steel rod. The diameter of the rod body is 240. The caliber of the shaft is 620mm. The product warranty time is 20 years without rust, and it can resist the typhoon of 12 grade. The main pole of the 15m high pole lamp is formed by the steel plate of Baosteel Q235. The pole is divided into 2 Set, the wall thickness is 5/5mm, the upper diameter is 220mm, the lower diameter is 450mm, the protection grade is IP, 65, the whole hot-dip galvanizing anti-corrosion treatment, the large bending machine is once rolled, the hot-dip galvanizing anti-corrosion treatment, ensuring the pole for 20 years Non-corrosive, the exterior is sprayed with white plastic, and the pole design has a maximum wind resistance of up to 35 m/s. It is equipped with lightning rod, rain cover, rod lifting system (variable motor, coupling, hoisting mechanism, wire rope, fall arrest device), automatic control system (control electric appliance, main and auxiliary cable). The lamp body cover is made of aluminum alloy die-casting, the surface is treated by electrostatic spray, and the high-strength tempered glass structure is light and corrosion resistant, and the protection grade is IP, 56. The translucent cover is made of curved high-strength tempered glass and has a high temperature resistance of 200 ° C or higher. The lamp panel can be manually raised and lowered during a power outage. The motor is made in Shanghai and the main cable is 3*16+1*10. The appliance uses 400W Philips high pressure sodium lamp with bulb, ballast and trigger. The goods are shipped with the label. Qualified high pole light products generally meet the above criteria.
Rooftop Solar
We design, develop and install cutting-edge solar systems that will best suit your premises and energy use.
We use only Tier 1 PV panels and can design a system to suit your budget. Ask us about cash positive installations for commercial businesses.
Our services include:
• energy consumption analysis
• cost–benefit and risk analysis
• business case development
• financing and grants
• community projects
• solar and battery solutions
• controls and smart meters
• installation and maintenance
Solar Panel Products,Solar Panels,Solar Panel Kits
Yangzhong Huaxin Power Equipment Co.,Ltd , http://www.huaxinbusbarchina.com