Of course, the tiles with different characteristics have their own best use. They have a good understanding of the knowledge of ceramic tiles, and they can be used in the decoration of the living room. Therefore, in the decoration project, when you want to buy ceramic tiles, you should be optimistic! Today, Xiaobian will bring you to understand the relevant aspects of ceramic tiles.
1. Tiles are divided into five grades according to different quality, such as superior products, first-class products, second-class products, third-class products and other foreign products. A clear and standardized building materials production license, product certification, trademark and quality inspection label are considered genuine.
2, before choosing a tile, first consider the design style of the room, according to the intensity of the room lighting, the size of the area, determine the color and pattern of the tile. Generally, the room should be narrow and the floor tiles should be used. At the same time, it is also necessary to pay attention to the coordination of the color of the bricks and wall tiles, doors and windows, furniture.
3, in general, the selection of tiles should be based on the room space to determine the type of bricks to buy. Glazed tiles: mostly used in kitchen and bathroom walls. Whole body brick: suitable for space with high wear resistance, such as living room. Matte brick: non-slip and wear-resistant, it is more suitable for families with old people and children. Polished tiles: high finish, non-slip, wear-resistant, long-lasting use, more suitable for one-step decoration.
4. Generally speaking, the room size is large. Generally, large tiles can be used for floor decoration. For rooms below 10 square meters, traditional 300×300mm floor tiles can be used, rooms below 10-20 square meters can be used, and 500×500mm floor tiles can be used. For rooms above 20 square meters, 600×600 can be considered. For those above 40 square meters, 800×800 or 1000×1000 specifications can be considered. Usually, the size of the bricks is proportional to the area of ​​the room. The small brick shop is too fragmented, and the big brick shop is not layered and too stiff.
5. The bricks are fired in batches. The products burned in the same kiln still have different color numbers. Therefore, it is necessary to calculate the quantity during the use process, and keep the batch of cartons in the paving process. The batch number of the product is good, otherwise it is easy to form a color difference, which causes regret.
6, the laying of bricks, we must pay attention to the seams, and now there are some so-called seamless tiles, in fact, it is just a trick. The seams of the tiles are not only to deal with the problem of irregular specifications, but the most important thing is to reserve the position for thermal expansion and contraction. Tiles are seamed, the wall is 1-2mm, some small bricks (100x100mm), for the sake of beauty, the seams need to be large. The seams on the ground, except for the retro bricks, need to leave a large gap (5mm-10mm), other bricks are generally 3-10mm.
7. Unless you have full confidence in the construction technology level of the workers, try not to use large-scale bricks with a specification of over 900x900mm. Such large bricks are prone to a series of problems in the future due to the large amount of air in the middle part during construction.
8, the kitchen and the bathroom floor must have a slope, this is to facilitate drainage. Another thing to pay attention to in the decoration of the tile is the treatment of the waterproof layer, and the wall of the kitchen and the bathroom should be highly regarded. Because the replacement of the tiles usually destroys the original cement sand pad waterproof layer. The remedy is to apply a layer of asphalt waterproofing layer before placing the tiles. The white cement filled between the tiles should also be replenished.
9, three points material, seven points maintenance. Not only the floor, but also the tiles should be cured to enhance the gloss and extend the service life.
Castiing die Aluminum Led Light Bulbs
Colorful pure aluminum die casting led bulb sockets Die cast lamp sockets Customized are welcomed
Apolication: used for all Led lights
Specification: custom as per provided product design drawing
Material: Aluminum die casting alloys (97-99% Al, other Silicon, Iron, copper, Magnesium, Manganese, Nickel, Zinc, Tin, Titanium)
Feature: heat resistance, pretty appearance, light weight, water proof, corrosion resistance
Production standard: DIN / JIS / ASTM / MIL
Main processes flow(depends on part complexity):
Provided Drawing / or Sample by customer →Mould making →Die casting →Deburring →Drilling and Tapping →CNC Machining →Polish→Surface treatment →Assembly →Quality inspection → Packing →Shipping
Drawing file(2D or 3D): In format of IGS, STEP, SLD,X_T, DXF, DWG, SAT, STL ,PDF
Surface treatment (optional):
Polishing, Sandblasting, Painting, Powder coating, Galvanizing, Chrome plating
Anodizing , Real gold coating, Imitation gold
Material for choose: A380, A360, ADC10, ADC12,
Pure Al Material for: Al6061, Al6063 etc
Casting die Aluminum LED light
Led Body,Aluminum Led Light,Casting Die Aluminum Led Light,Led Lamp Body
Dongguan Hongge Hardware Technology Co., Ltd , http://www.honggecasting.com