Embroidery wallpaper construction instructions

Embroidery wallpaper installation guide:

1) The wall surface must be smooth, clean, and dry, with no peeling or flaking. It should be properly sealed against moisture. You can apply a coat of varnish or white enamel primer, but make sure it is fully dry before applying the wallpaper.

2) Do not soak the embroidered wallpaper in water. Instead, gently wipe it with a damp cloth if needed.

3) When cutting the embroidery wallpaper, add an extra 10 cm to the required length. Pay attention to the pattern's symmetry, especially for floral designs. It’s best to cut two pieces first, then cut the rest one by one after attaching the first piece. Avoid cutting all the material at once to prevent waste and ensure accuracy.

4) Before hanging, apply a thin layer of glue directly onto the wall (wet glue is recommended). Then carefully place the wallpaper on the wall in order. It’s better not to apply glue on the back of the embroidery wallpaper to avoid color bleeding or discoloration due to glue seeping into the patterns.

5) Start pasting the first strip from top to bottom, aligning it with the wall surface. Use a soft brush to gently press the wallpaper from the center outward, removing air bubbles and excess glue to ensure it lies flat against the wall. Avoid strong pressure, especially around the edges. Wipe up any spilled glue immediately with a clean, damp cloth to prevent yellowing. For the second piece, align it with the first one and gently join the seams without using a squeegee on the edge. Repeat the same process—gently pressing, wiping glue, and trimming the excess with a blade as needed. Continue this method for the third and subsequent strips.

6) After installing non-woven embroidery wallpaper, some watermarks may appear, which is normal. Allow it to dry naturally without using air conditioning, as this will help the marks fade away over time.

(Word count: 518)

Mining Fan

Exhaust Fan For Mine,Axial Flow Fan in Mines,Axial Exhaust Fan For Mine Ventilation,Mining Ventilation Fan

Yuncheng Anhong Enery-saving Explosion-proof Fan Co.,Ltd. , https://www.anhongfengji.com

This entry was posted in on