Bathroom accessories installation tips

1. Towel rack: mainly installed outside the bathtub, about 1.8 meters above the ground. A bath towel is placed on the upper layer and a towel can be placed on the lower tube.

2. Double towel rack: can be installed on the empty wall in the center of the bathroom. When installed separately, it is about 1.5 meters off the ground.

3. Single-bar towel holder: can be installed on an empty wall in the center of the bathroom. About 1.5 meters from the ground.

4. Single cup holder, double cup holder: generally mounted on the wall on both sides of the washbasin, in line with the cosmetic frame. It is mostly used to place toothbrushes and toothpaste.

5. Toilet brush: It is installed on the wall on the side of the back of the toilet. The bottom of the cup is about 10 cm away from the ground.

6. Soap net, soap ashtray: more on the wall on both sides of the washbasin,

In line with the dressing table. Can be combined with a single cup holder or a double cup holder. Soap nets can also be placed on the interior walls of the bathroom for easy bathing. The soap ashtray is placed on the side close to the toilet to facilitate the soot.

7. Single-layer rack (make-up rack): mounted on the top of the washbasin and under the vanity mirror. The height from the washbasin should be 30 cm.

8. Double racks (makeup racks): Install on both sides of the washbasin.

9. Clothes hook: It can be installed on the wall outside the bathroom, and should be at a height of 1.7 meters. Used to hang clothes during bathing. A plurality of clothes hooks can also be used in combination.

10. Corner glass frame: It is mainly installed on the corner above the washing machine. The distance between the frame and the washing machine should be 35 cm. Used to place detergent, soap, detergent and the like. It can also be installed on the corner of the kitchen to place seasonings such as oil and wine. Multiple corner frames are assembled in a combination of visual space locations.

11. Tissue holder: It is installed on the side of the toilet, easy to reach by hand, and less obvious. Generally 60 cm off the ground is appropriate.

Material:Mild Steel (Low Carbon Steel) or Stainless Steel


Steel Grating standards: 
A) China: YB/T4001-1998 
B) USA: ANSI/NAAMM (MBG531-88) 
C) UK: BS4592-1987 
D) Australia: AS1657-1985 
E) Japan: JJS.



Galvanized Steel Grating
Surface Treatment:Untreated, Painting or Hot dip Galvanizing

Charaterristics:The installation has the advantages of simple construction, light weight, good impact resistance, good bearing capacity ability,rather large water displacement characteristics, corrosion and rust resistance. 

Galvanized Steel Grating



Application: It is widely used in urban road, square, garden, wharf, airport, parking lot, highway, railway, industrial.

Galvanized Steel GratingGalvanized Steel Grating


Galvanized Steel GratingGalvanized Steel Grating


Item No.

Bearing Bar 
Pitch

Cross Bar Pitch

Specification of bearing bar load width × thickness

 

 

 

32×5

40×5

45×5

50×5

55×5

60×5

1

30

100

G325/30/100

G405/30/100

G455/30/100

G505/30/100

G555/30/100

G605/30/100

 

 

50

G325/30/50

G405/30/50

G455/30/50

G505/30/50

G555/30/50

G605/30/50

2

40

100

G325/40/100

G405/40/100

G455/40/100

G505/40/100

G555/40/100

G605/40/100

 

 

50

G325/40/50

G405/40/50

G455/40/50

G505/40/50

G555/40/50

G605/40/50

3

60

50

G325/60/50

G405/60/50

G455/60/50

G505/60/50

G555/60/50

G605/60/50

Galvanized Steel Grating

Galvanized Steel Grating,Galvanized Steel Deck Grating,Galvanized Steel Drainage Grating,Drainage Canal Galvanized Steel Grating

Hebei Zhenxing Jinyuan Wire Mesh Group Co.,Ltd , http://www.zxsteelgrating.com

This entry was posted in on