Statement 1: The thicker the plate, the better the quality?
During the visit, the reporter found that many salesmen would introduce that the thickness of the furniture panels is large, so that the strength of the panels is better. After the reporter personally experienced it, I also found that the sliding doors of some large-brand flat-panel wardrobes did pull up and feel thicker. Some small-priced brand products with cheap prices made people feel light and fluttering. Can the weight of the board really determine the quality?
According to experts, Luo Wei, director of the National Center for Quality Supervision and Inspection of Furniture and Indoor Environment, said that although the theoretical strength of the sheet will be relatively high, the nail holding power will be better, but consumers do not have to excessively pursue the weight and thickness of the sheet.
He introduced that the particle board plate clearly defines its density in the national standard. As long as it meets the standard, “it should be enough.†In addition, for the table top, the thickness of the plate is larger, it may bring a sense of solidity, but the wardrobe Doors and the like are mainly used for shielding, and it is not necessary to be too thick.
Many plates look very thick, but in fact the middle layer is a combination of multi-layer plates. "There may be hollow inside. If it is solid, it is too heavy, no need." In addition, Luo Wei reminds that it is too heavy. The plate will impose a burden on the hardware and affect its service life.
Statement 2: Can the wear resistance be measured with a key?
More than one salesperson showed that the quality of his brand's plate finish was high, he chose to use the key to draw back and forth on the surface of the board, and then pointed out to the reporter that there was no trace on the board, and the salesman used the marker pen to write freely on the surface of the furniture and then use the rag. Easily wipe off to prove that the board has good stain resistance.
Experts say: The national standards have clear requirements for the wear resistance and stain resistance of the surface of the board. Luo Wei said that the demonstration made by the salesperson is actually the minimum performance that the surface of the board should have, and it cannot explain the problem. Because in the actual test, the detection means and conditions are much more stringent, such as anti-fouling, the type of stains will have soy sauce, lipstick and other effects on the surface of the board for a certain time, then look at the effect.
Statement 3: Is the plate still imported?
When purchasing sheet furniture, many consumers will struggle to choose domestic or imported plates. Some salesmen spare no effort to introduce imported plates: “The environmental performance of imported plates is the best.†But the price of imported plates is also better than domestic. The board height is about 20%.
Experts say: Luo Wei believes that from the quality point of view, the current domestic large-scale sheet metal products are not worse than some imported plates, and all the plates that meet the national standards should be passed through in terms of environmental performance and usability. It can only be said that some exporting countries have high quality control levels and product quality is relatively stable. He said that consumers do not have to be too superstitious, or choose according to their own economic ability.
Statement 4: Sealing the edges neatly, can seal the formaldehyde?
Some salesmen will let consumers observe the edge of the furniture when introducing their own furniture. "The sealing of our plates is very strict, so that the formaldehyde seal can't come out inside, and it will be released to the home. Some small manufacturers If the edge bandage is damaged, you have to be careful, and the formaldehyde is running out."
Experts say: whether the edge sealing of artificial boards is very strict has little effect on the release of formaldehyde, because even if the sealing is tight, formaldehyde will continue to be released, but the speed is slower per unit time. When the sealing edge is broken, the release speed is only accelerated, and the total amount of formaldehyde actually released is basically the same. Luo Wei said that the edge seal has a greater impact on the aesthetics. In addition, the sealing edge can prevent the sheet from absorbing water and swelling after being exposed to water.
Our company produces a vary of specifications of Glass Particles and glass-lumps which can be used in ordinary pavement of road to shorten braking distance effectively, to improve the warning role and to decelerate in advance to achieve safety. Pavement laid with this product will not peel off and maintain function well after a long time wheel friction.
It is also used in the decoration of building outer-walls and all kinds of ceramic. There is mainly 1-2 mm, 2-3 mm, 3-4 mm, 600-850 microns, 300-600 microns, 180-300, and less than 180 microns etc. as well customized specifications customers require.
The glass bead can be produced based on the standard of countries or areas, such as EN1423/1424, AASHTO M247, BS6088, JIS R3301 and KS L2521 etc.
Glass Particles
Glass Particles,Plastic Glass Particles,Color Fireproof Glass Particles,Crushed Colored Glass Particles
CHIYE GLASS BEAD (HEBEI) CO., LTD , http://www.chiyeglassbeads.com