Kitchen and toilet integrated ceiling construction considerations

When kitchen ceilings need to pay attention to "three defenses"

Experts believe that in general, ceilings for kitchens and bathrooms are the first to pay attention to “three defenses,” namely, waterproof, moisture-proof, and fireproof. Therefore, wood keels are not recommended for material selection.

At present, aluminum buckles are commonly used in home improvement, which basically can overcome some defects of PVC sheets, such as being prone to discoloration, aging, and damage due to prolonged time, and it is difficult to clean the greasy substances sticking to them.

The "aluminum-plastic board" which is only one word away from "aluminum gusset plate" is different in practical effect. Because in the process of installing aluminum-plastic composite panels, it is very unwise to use wood panels to support the bottom. If the treatment is not good on moisture, the consequences will be unthinkable.

It is also worth noting that the key to the ceiling of the kitchen is to “grasp the sense of proportion” during the construction process, that is, when the fasteners are drilled, do not drill too deep. In the past construction, there was such a case. Because it was drilled too deep, it just touched the borehole of the occupants upstairs. It may not be perforated, but it destroyed the original waterproof capacity and the future troubles were endless. Therefore, we recommend keeping 3-4 cm when drilling is the best.

Currently, there are significant differences in the thickness of aluminum buckles on the market and whether they are coated or not. Good for 120-130 yuan / square meter, poor as low as 20 yuan / square meter. If according to the formal decoration company's quotation, including materials and labor costs, the total kitchen ceiling decoration can be completed at 160 yuan/m2.

Pre-installation of kitchen ceiling

1. Installation time: After the kitchen and toilet wall tiles are finished, the aluminum buckle plate should be installed. On the day of sticking the wall tiles, you can call the merchant to reserve the time for the door-to-door measurement. After the call, the merchant will come to the door to measure, 1 - 2 days out of the installation map, confirmed by the owner, 3-5 days can be shipped and installed. The average installation time for three rooms is 1.5 days.

2. Installation height: In order to obtain the best heating effect, the height of the bottom side of the heating foam after installation of the product should be between 2.1M and 2.3M. Excessively high or too high bottoms will affect the use effect, and the mezzanine space formed between the ceiling and the top of the house. Height should be not less than 250MM.

3. Ventilation: Determine the position of the ventilation hole on the wall and open a hole with a diameter of 105 mm.

4. Main keel: If you do not use light steel keel, then you need to prepare a good moisture-proof square wood, the specifications are generally 4CM * 4CM, and according to the longest length of the room reserved, 2 each. (just put it on the ground)

Ceilings Integrated ceilings Kitchen ceilings Home improvement Spaces Room decoration Kitchen ceilings Kitchen wall tiles Bathroom doors Toilet ceiling materials Bathroom wall tiles Bathroom size Toilet ceiling Toilets Waterproof bathroom door dimensions

Cutting & Grinding Wheels

Cutting Wheels,Grinding Wheels, Reinforced Grinding Wheel

Diamond Wheels,CBN Wheels, Band Saws Co., Ltd. , http://www.cndiamondwheels.com

This entry was posted in on