Key monitoring hidden project
Water circuit reconstruction and other hidden projects will directly affect the future use of life. Therefore, it is necessary to guard against sticking during the transformation process. After many years of use, the old house will be old and may leak water. After waterproofing is completed, a 24-hour water-repellent test must be performed to verify that the waterproof layer is intact. In general, the waterproof layer of the shower is 1.8 meters, the height of the other wall waterproof layer is 1 meter, and the waterproof height of the floor is 30 cm.
If the waterway is not reformed during the renovation, it is also necessary to check if the waterproof layer is intact. During the decoration process, holes, grooving and other actions may damage the waterproof layer. Therefore, if the second-hand housing is used to remove the decoration steps of the tiles, the water-repellent test should be conducted again to ensure that the original waterproofing is not a problem.
After the circuit is completed, it is necessary to check whether each socket, switch can be used normally, and whether the installation position meets the original requirements.
Heating needs to leave cooling holes
Some top floor old houses have heating pipes that affect the interior appearance. The easiest way is to wrap the pipes near the roof as ceilings.
It should be noted that the circulation and flow rate of these heating pipes tend to be better than the radiators, so they will make the winter home warmer. Enough heat dissipation holes must be provided to wrap the heating pipes. This will not only allow the hot air to flow out, but also prevent cracks and deformations of the gypsum board ceilings from being “baked†by hot air for a long time.
Remodel brick and mortar houses to be cautious
Breaking walls and knocking on the ground are often inevitable projects for the renovation of old houses, but some old houses in brick-concrete structures need to be especially cautious when they are being demolished. The wall of the brick-concrete structure first plays a role in load-bearing earthquake resistance, and secondly, it is the function of enclosing partitions. If only the load-bearing wall is destroyed in order to achieve an ideal spatial pattern, the weight bearing and seismic resistance of the wall will be weakened, resulting in potential safety hazards.
Therefore, in the process of demolition, renovation and refurbishment, we must take into account the housing structure and safety issues, and we should boldly innovate on this basis. Otherwise, once we “move handsâ€, it will cause irreparable damage.
Second-hand housing renovation old room decoration heating interior decoration switch socket space ld tiles
Sun Sheets,Pc Embossed Sheets,Polycarbonate
Fenghua Jade Motor Co., Ltd. , http://www.hypcsheets.com