The price of solid wood flooring is relatively high. If it is affected by improper laying, it may not be worthwhile. The following are a few places to take care when laying solid wood flooring.
After the wooden keel is finished, be sure to check
The unevenness of the ground caused some floors and wooden keels to hang, and the floor was easy to make noises. If the wood keel is not firm, it is easy to produce the same situation, so be sure to check it after it is finished. You can step on the wooden keel with your feet and check if it is firm by shaking your feet.
Floor leveling work can not be forgotten
After paving the first row of floors, the installer should pull the straight line to measure the level. If it needs to be adjusted immediately, it will affect the laying of the back floor. After laying, it is better to take the ruler upright on the floor to see if there is any Gap.
Wood keel to do drying and tamping
The moisture content of a generally qualified solid wood floor is 12%, and the wood keel must be dried so as not to cause rapid moisture absorption of the wooden floor due to excessive humidity, resulting in arching of the floor and cracking of the paint surface. Solid wood flooring has good log properties and is prone to worms. Therefore, it is necessary to put wood chips in the wooden keel. The standard is to put 1 kg of rake wood on every 8 square meters, and pay attention to putting it evenly.
The color difference problem pays attention in advance
The color of each solid wood floor will be different, so you should pick out the floor with similar color and texture before the formal laying, so that the overall pavement effect will not be much different.
Moisture pad laying stress
In order to avoid the “infection†of water and gas on the walls to the solid wood floor, not only the entire wooden keel should be covered when laying the moisture-proof pad, but also the moisture-proof pad should be left up to about 10 cm along the foot of the wall. At the same time, expansion joints should be left between the wooden floor and the wall. If it is too tight, the floor will bulge easily after the expansion.
Floor purchase floor maintenance nature floor paint
Products features:
1. Very durable: we can use 50 years generally.
2. Noise-resistant: it is made of cast iron and with enameled coating on the surface. A bathtub is very heavy, and the material cast iron is very high, so when we fill water in the bathtub or shower trays, we won`t have a big noise.
3. Temperature - preservative: cast iron layer is 7-9mm. The specific heat of cast iron is comparatively high. So the water won`t cool down quickly.
4. very easy to clean: the enameled coating is applied on the cast iron base substrate under a high temperature 900 degrees for 3 or 4 times. So the shower trays or bathtub`s surface is very smooth, and comfortable to feel and easy to clean.
5. Acid and alkaline-resistant: when we put 10% acid on the surface, the gloss won`t be affected in any way.
6. Completely safe to our skin: the perfume or other lotion we normally use on the body, won`t affect the bathtub and shower trays, and it also won`t have static electricity or radiating elements.
I learn from a report, cast iron enameled sanitary ware is the safest type, because the bacteria are very difficult to exist on the surface.
7. Massive solid: we could have a very good artistic decoration effect.
Cast Iron Shower Tray,Cast Iron Enamel Shower Tray,Enamel Shower Tray,Freestanding Cast Iron Shower Trays
Linyi Luxing Enamel Co., Ltd. , http://www.luxingbath.com