Glass film is a new type of energy-saving building materials and one of the more popular glass decorations. The glass film not only has the effects of heat preservation and UV protection, but also can protect privacy well, so it is deeply loved by consumers. So how to stick the glass film ? What are the techniques for sticking glass film? Let's take a look with the editor.
1. How to paste the glass film
1. Cutting: When cutting the glass film, its length should be about one centimeter higher than the glass length, so as to effectively avoid the phenomenon of distortion or repeated paste.
2. Clean the glass: Clean the glass before attaching the glass film, and then spray some water on the cleaned glass to let it reduce the viscosity of the glass film, so that its viscosity will not be affected after drying.
3. Remove the release film from the other side: After removing the release film, sprinkle some water on the back of the glass film, which can facilitate the subsequent construction, so that the film can be moved during the process of paving to find a suitable location.
4. Paving: Measure the size on the glass, align the upper end of the glass, and paste it from top to bottom. If it is not aligned at one time, you can tear it off and lay it again. This is the benefit of the watering mentioned above.
5. Exhaust air bubbles: scrape out the air bubbles in the film with a scraper. If the air bubbles that cannot be exhausted are pierced with a needle and smoothed out, make it stick to the glass completely.
6. Cut the remaining part: After the paving is completed, use a blade to cut off the excess part.
Second, what are the skills of sticking glass film
1. In addition to pay attention to the method of how to stick the glass film, and the glass must be thoroughly cleaned, spray more water during the cleaning and then scrape it with a spatula several times, to ensure that there is no dust on the glass, etc. Sprinkle a layer of water after cleaning.
2. Before applying the film, spray some lubricant to reduce the viscosity of the adhesive layer, and then tear the protective film while applying the film. Secondly, we must determine the position of the glass to fix the film. You can first make a cross and scrape the film from both sides. After fixing the film, use a scraper to scrape the bubbles out.
3. After the construction of the glass film is completed, spray a little detergent on the glass, and then wipe it clean with a rag, so that the residue on the surface can be effectively removed and the glass can be made brighter.
Editor's summary: Through the above explanations on how to paste the glass film , I hope it can help friends. It is relatively simple to paste the glass film, but it is also difficult to operate in practice, so not only to grasp the technology and method of paving, but also pay attention to the details.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
3Ply Face Mask, Disposable 3ply Face Mask,Non-Woven 3ply Face Mask,3ply Face Mask with Ear Loop
Ningbo Jiashang textile co., LTD., , https://www.cn-jshang.com