ã€ALUMINIUM NETWORK】Main reason analysis Due to the insufficient air cooling at the outlet of the extruder, the aluminum extrusion (Aluminium Extrusion) contacts the oscillating bed at a higher temperature. The cooling rate of the contact part is different at other locations, and there is a thick Mg2Si phase. Precipitation, after anodizing the site turned dark gray.
Solution 1. Strengthen the air-cooling intensity to avoid too small interval of the profile on the swing bed and ensure the air-cooled temperature gradient;
2. Conditional factories should adopt a combination of atomized water cooling and air cooling to completely eliminate dark spots.
Elegant insect protection roller blind for door
Screwing mounting into the wall.Long-lasting, sturdy, powder-coated aluminium aluminium profiles
UV-resistant and tear-resistant fiberglass fabric
Smooth rolling of the roller blind in a compact aluminium cassette
Rollo individual, open and close either with two handles
The ideal solution for various door airing without being disturbed by annoying insects
EN13561-2015 certification:
Resistance to wind load: Class 1
Operating effort: Class 1
Mechanical Endurance: Class 1
Resistance to corrosion: Class 2
As the professional Insect Screen supplier, we cooperated with consumer from all the world to settle the insect problem.
Roller Insect Screen Door,Screen Rolling Tool,Curtain Door,Mosquito Insects Window Screen
Huanghua Techo Building Material Co., Ltd. , http://www.insectsscreen.com