**Bearing Professor Explains the Causes and Solutions for Bearing Overheating**
Home > Bearing Knowledge > Bearing Professor Helps You Analyze the Causes and Disposal Methods of Bearing Overheating
---
**Source: China Bearing Network | Date: December 7, 2013**
Bearing overheating is a common issue that can lead to serious mechanical failures if not addressed promptly. In this article, a bearing expert breaks down the main causes of overheating and offers practical solutions to prevent or resolve the problem.
Here are seven key reasons why bearings might overheat and how to fix them:
1. **Damaged Bearings**: If the bearing itself is damaged, it must be replaced immediately to avoid further damage to the motor or equipment.
2. **Improper Lubrication**: Too little or too much grease, or the presence of impurities like iron shavings, can cause overheating. The grease should not exceed 70% of the bearing’s total volume. If contaminated, the lubricant must be replaced with clean oil.
3. **Incorrect Fit Between Shaft and Bearing**: A tight or loose fit between the shaft and the bearing can cause excessive friction. If too tight, the shaft head may need to be ground down. If too loose, the bearing should be properly seated on the shaft.
4. **Misalignment Between Bearing and End Cap**: If the bearing and end cap do not fit correctly, it can lead to uneven load distribution. In such cases, the bearing chamber should be reprocessed, or a steel sleeve should be added to the end cover if it's too loose.
5. **Improper Installation of End Caps or Bearing Covers**: Misaligned caps or covers can create stress on the bearing. Ensure that all caps are installed flat and screws are tightened properly.
6. **Tight Belts or Misaligned Couplings**: Excessive belt tension or misaligned couplings can increase the load on the bearing. Adjust the belt tension and realign the coupling to reduce stress.
7. **Issues with Sliding Bearings**: Insufficient lubrication, impurities in the oil, or a stuck oil ring can cause sliding bearings to overheat. Refill the lubricant, replace the oil if necessary, and repair or replace the oil ring as needed.
By addressing these issues early, you can significantly extend the life of your bearings and improve the efficiency of your machinery.
---
**Related Bearing Knowledge**
- The use of imported bearings in daily operations
- Energy-saving heat treatment techniques in the bearing industry
- SKF bearing types and their applications
- Spherical roller bearing layout and features
---
This article was originally published on China Bearing Network. For more information, visit [China Bearing Network](http://www.chinabearing.net).
Previous: Pre-treatment methods for rusting on FAG bearing outer surfaces
Next: Differentiation of adjustable clearance rolling ball bearings (Part 1)
Supporting Plate Floating Sphere
Supporting Plate Floating Sphere,Steel Floating Ball Valve,Hard Floating Sphere Ball,Hard Steel Floating Sphere
Antong Valve Co.,Ltd , https://www.atvalveball.com